Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bonnie
January 28, 2023
I need a diagram of how the belt goes on please
For model number HLP141E-CF06M0E0M00
Hello Bonnie, thank you for contacting us. Remove the top of the appliance by undoing these two screws at the back. Remove the kick strip at the bottom of your machine. You may need to use a flat-headed screwdriver for this, and then undo this screw and one underneath to help release the side panel. Remove the four screws at the back that hold the side panel in position. Remove the top screw and the internal cabinet screws there. With all the screws out, now remove the side panel. Remove the screws down the side, allowing you to move the back of the machine and the drum away. To fit the new belt, what you need to do is pull the back of the machine and the drum away from the front and then drop it through the gap. Relocate the drum onto the front panel. Re-tighten all four screws that hold the side panel in place so you can fit the belt to the motor spindle. Stretch the belt over the motor spindle here. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
