This is the light switch that goes in your refrigerator. If the light is not working or stays on, you may need to replace the switch. It is made of mainly white plastic, and is an OEM part, directly f...
The lid bumper or evaporator fan motor bumper in your refrigerator prevents the fan motor from scraping against the side bracket. If your refrigerator/freezer is noisy, the bumper could be worn down o...
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. This part has been updated by the manufacturer and may appear different t...
This evaporator fan blade is for your refrigerator, and it circulates air so that the temperature of the fridge is regulated. This model has 3 blades, and is a little more than 4 inches in diameter. I...
This LED light board assembly is designed to illuminate the interior of your refrigerator, making it easy to see food items clearly—even in low-light conditions. If the lighting inside your fridge has...
This part is a replacement pan cover gasket for your refrigerator. You will find the pan cover gasket on the meat pan, and it helps to seal the pan. If the pan cover gasket is lost or damaged, it will...
This crisper cover helps keep your fruits and veggies fresh by sealing off the drawer area and supporting the glass shelf above. If your current cover is cracked or the glass doesn’t sit right, this r...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
RICHARD
July 15, 2025
We are getting only Crushed Ice even when Cubed button is pushed
For model number GZS22IYNYHFS
Hello Richard, thank you for reaching out. The issue seems to be with the crusher solenoid, we would recommend checking it. The part number is PS16660062. This solenoid, an electromagnet, might be stuck or malfunctioning, preventing it from lifting the lever that opens the flap for cubed ice. We hope this solves your problem!
Was this helpful?
Thank you for voting!
SANDRA
May 8, 2026
where do you adjust the temperature in side refrigerators?
For model number GZS22IYNYHFS
Hello Sandra, thank you for getting in touch. The temperature can be adjusted using the control display located at the top of the freezer. To adjust the temperature in the freezer compartment, press the Freezer pad repeatedly until the desired temperature is displayed on the control panel. To adjust the temperature in the refrigerator compartment, press the Refrigerator pad repeatedly until the desired temperature is displayed on the control panel. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
we just pried out the old switch and pulled it out the rest of the way with a pair of needle nose pliers. Pulled off the wires on the broken switch and reattached to the new one and just slid/clicked it back into the hole.
Replaced gasket. No tools requires. Just pull the old one out and press new one in channel with hands. TIP: heat the new one slightly with a hair dryer or a heat gun on low. Makes it more flexible
Removed the ice bin and maker, then removed cover from the rear that covered the solenoid that controls the dispensing mechanism. Replace solenoid. The tricky part here is that there is a styrofoam cover around the solenoid pin that needs to be superglued into place and oriented properly during replacement. All electrical feeds snap out neatly and are easily replaced. Reassemble ice dispenser and bin, and viola, your back in business.
