This evaporator fan motor is located in the back of the freezer and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
This water filter improves water quality in select refrigerators by reducing lead, VOCs, and 50+ impurities. NSF-certified (42, 53, 401), it ensures clean, fresh-tasting water. Located in the upper-ri...
This door recess spring or dispenser lever spring in your refrigerator is used to return the ice door to the closed position or the dispenser lever to the home position once released. You will find th...
This part is the replacement water line for your refrigerator. It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or will not dispense water or ice, you ...
This ice maker assembly is used to make ice in your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the...
This genuine OEM solenoid is designed for use with GE refrigerators and controls the opening and closing of the ice chute door. It serves as a direct replacement for a worn or faulty solenoid, helping...
This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.
$17.70
Special Order
Questions And Answers for GZS22IYNBHFS
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Judith
January 21, 2023
Where is the light located on the top section of the freezer side (where ice maker is located). All other lights work but I cannot find where this bulb is.
For model number GZS22IYNBHFS
Hi Judith,
Thank you for your question. According to your owner's manual, the freezer light is located in the back of the freezer section, behind a light shield. Before beginning this repair, unplug the refrigerator.
Remove the shelf above light shield. To remove the light shield, press in on the sides, and
lift up and out. Replace the bulb with an appliance bulb of the same or lower wattage, and reinstall the light shield. When reinstalling the light shield, make sure the top tabs snap securely into place. Replace the screw. Reinstall the shelf and plug the refrigerator back in. We hope this helps with the repair!
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Sharyn
March 7, 2025
The water dispenser and ice maker stopped working. Periodically the inlet hose moves around and the fridge makes a bunch of noise.
I'm thinking there's a water pump inside the freezer that may need replacing? Have you run into this before? Thanks so much!
For model number GZS22IYNBHFS
Hi Sharyn, thank you for reaching out. There is no water pump inside the freezer. The issue could be with the water inlet valve, part number PS12727426. It is responsible for controlling the flow of water into the water dispenser and ice maker. You may need to replace it to fix the issue. We hope this solves your problem!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Frank
July 14, 2023
Meat drawer broken.
For model number GZS22IYNBHFS
Hello Frank, thank you for your query. The meat drawer for your model is part number PS11759186. Glad to be of help!
Was this helpful?
Thank you for voting!
Kerry
April 9, 2024
Do you sell replacement doors - for the refrigerator side? Ours got dented. Thanks!
For model number GZS22IYNBHFS
Hi Kerry, thank you for getting in touch. The refrigerator side door is part number PS12727525. If you require assistance to place an order, please contact customer service!
Was this helpful?
Thank you for voting!
Michel
July 11, 2025
Where can I purchase the freezer backlight bulb, the one in the back of the freezer with the shield that's hard to remove? I damaged the fridge while trying to remove the light shield.
For model number GZS22IYNBHFS
Hello Michel, thank you for reaching out. The LED light assembly you are looking for is part number PS11767930. To remove the light assembly, first disconnect the cover by pulling it down from the back. Disconnect the wire going to the light assembly. Then press the tab to remove the light board. To install the new assembly, position it over the post and snap it into place. Connect the wire connector and replace the cover. We hope this helps.
After replacing the defrost heater, main board and thermistor I still had the same problem. Called a repair guy and he (with the help of GE on the phone) diagnosed that the temperature sensor was bad. So I ordered from partselect and installed it and it fixed the problem. Been good for a couple months (knocking on wood). To install I had to cut the 2 wires to the old sensor, crimp the 2 new wires on and snap the new sensor to the clip on the evaporator. Very easy. Make sure you seal the ends of the wire crimps so moisture doesn't get in and corrode the connection.
I went to a GE repair center to explain my problem, the service center reccomended that I have a techinician come out o look at it. $75.00 for the visit and what ever labor and materials wuld cost.
I went on line to see if there were others having this same problem and found that there were many with the same problem.
After reading some of the ways that people found out what was wrong ...it became a matter of three components, the timer, heater or thermostat.
I tried the most common component and the less expensive one first , the thermostat switch I installed it very easily snipping two wires and attaching the news using wire nuts I used the diagram on this website to pinpoint the component and there has not been a problem since.
I removed two srews from the back panel inside fthe reezer compartment and the two that hold the air manifold/baffle? and pulled the baffle out. Then, I removed the two srews that hold the front part of the fan bracket behind the baffle and the back panel came out easily. Two more screws and one quick connect plug attached to the fan and I was done with removal. Insallation was even quicker, I slid the original fan right off the old motor and slid it on the new motor's shaft. Piece of cake! Thanks Partselect.
