This authentic, white Drum Bearing Slide, also known as the bearing drum slide, glide, or pad, is a plastic, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for ...
This original equipment manufacturer Drum Bearing Slide is a plastic, green, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for easier movement. You'll know if...
This drum bearing helps your dryer operate as quietly as possible.The drum slides should also be replaced when replacing the drum bearing. The slides are NOT included with this part this is the bearin...
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...
The door latch lid lock is to lock the door on your washer when the appliance is in use. Your washer will not start if your door is not locked. If your latch is broken, you may not be able to start a ...
$134.02
Special Order
Questions And Answers for GTUP270EM1WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
December 22, 2019
Washer makes roaring sound in spin mode
For model number GTUP270EM1WW
Hi Brian, thank you for your question. You may need to take a look at your bearing inside of the outer tub or the transmission for being the issue. If that part is fine then it may be your motor. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
January 30, 2023
washer overflows except on low or medium water level
For model number GTUP270EM1WW
Hello Paul, thank you for contacting us. The issue is probably related to a faulty electronic pressure switch, part number PS3499721. It senses and controls the water level in the washer. Please reach out to customer service if you need help placing an order. Glad to be of help!
Water is coming out from the bottom of the washer.
For model number GTUP270EM1WW
Hello Hezekiah, thank you for your inquiry. According to our research, we would recommend checking the drain hose for any damage. If it is fine, then the issue is most probably with the drain pump, part number PS3501453. We hope this information helps!
Do the front of washer machine come off.to get to the parts., I'm
For model number GTUP270EM1WW
Hello Hezekiah, thank you for reaching out. Based on our research, you can remove the front of your model. You just need to take a putty knife and insert it between the top panel and front panel to release the tabs. Release the bottom tabs and pull the front panel to remove it. Now you can access the parts. Glad to be of help!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on. This was a first attempt ever at fixing an appliance and it was no big deal.
It was actually my father, he doesn't use the internet. He thought that because the dyer got real hot and then shut off he thought the thermostat wasn't working and the high temp shutoff was okay. He went through the manual and found the part and took it out. He called the service number but they wanted $50 dollars plus shipping. I saw it was a Thermo-disc part so I tried the manufacture's website but I couldn't match the numbers on the back to their part numbers. I tried several other sites and your site was the cheapest. It was real easy to use the web site and diagrams to find the right schematic and part. I ordered it online and it was delivered in 2 days with the regular shipping. When he first put it in the dyer didn't turn on. He found no power coming out of the timer so he cleaned the contacts and it worked. Thanks for making the ordering so easy.
First I really had to hunt for the proper way to get my dryer drum accessible for the repair. With my model it was as simple as removing two screws to take off the top panel (located by opening the dryer door), and then removing two other screws inside the front panel at the top. The front will then be able to swing to the left side (the door switch wires are on this side for this model). Simply remove the drum bearing by gently pulling it off. My slides were in such poor shape for less than 4 years old!! One of them had completely disintegrated! These slides have a small whole on one end which attaches to a small nub at the edge of a slot while the other side just slid into a slot at the other end. No need to even take out the drum!! The hardest part of the job was to get into the dryer!