All Installation Instructions for General Electric Refrigerator GTH18GBDDRWW

Bottom door hinge was lost during move

I had lost the bottom hinge during a move and so I rigged the hinge using an old tv antenna and the door never really quite worked right and it was VERY annoying. I stumbled upon this site and was surprised how inexpensive the part I needed was. I was very impressed with the speed of shipping and the install took maybe 5 minutes. The fridge works as good as new. Thanks a ton!

Parts Used:

Refrigerator Hinge Bottom Pin

Dustin from Marlow, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

10 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Fan Motor was Noisy

4 screws in the freezer and the back panel came off then 2 more screws to take the motor off. I unpluged the old motor pluged in the new motor put the back panel back on and I was done.

Parts Used:

Compression Ring

Evaporator Fan Motor

Evaporator Fan Grommet - Red

albert from patterson, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

door dairy was broken

Repair was a no brainer. More important, Part Select was extremely efficient. Customer Service was very helpful as my model number was not available on line. Thanks for your wonderful and prompt service. Rich L.

Parts Used:

Dairy Door

Richard from Millbrae, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

8 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Noisy evaporator fan motor

Removed old replaced with new part. Easy Peasy

Parts Used:

Evaporator Fan Motor

Refrigerator Air Duct Insulation

Greg from HADDON HGTS, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

light not working

I used pliers to pull lightly on the head of the switch, while I inserted a small flat head screw driver into the base of switch and gently worked around the edges to free it from the panel.

Parts Used:

LIGHT SWITCH

robert from FRANKLIN SQ, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

7 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Handle broke off at top where the screws were on door.

Removed the screws, placed new handle on door, tightened screws, all done.

Parts Used:

Refrigerator Freezer Door Handle Kit - White

Mary Ann from BELLVILLE, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Remove screws holding handles

Using a screw driver(Phillips) I removed screws on top and bottom. Very easy and quick parts fit like a glove.

Parts Used:

Refrigerator Freezer Door Handle Kit - White

Roger from SUFFOLK, VA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

no shelf in my freezer

first I ordered parts that didn't work. the return process was painless and I found the part I needed, which just popped right in!

Parts Used:

Freezer Shelf

Barbara from Brookfield, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

7 of 11 people found this instruction helpful.

Was this instruction helpful to you?

NOISY

I FOLLOWED YOUR VIDEO............WAS EASY. THANKS

Parts Used:

Evaporator Fan Motor

Evaporator Fan Grommet - Red

Lid Bumper

Paul from NANTUCKET, MA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Handle broke on the top where the screws go.This is the second handle that broke in the same place in 5 years.

Remove the top screws, with a Philips screw driver, take broken piece out. Then remove the plastic cover on bottom of handle, take the torx screw out. Now handle is off.Put new handle in place and put all three screws back in. Then install new plastic cap, and you are all done.

Parts Used:

Refrigerator Freezer Door Handle Kit - White

Screw

Jerry from Esparto, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

refrigerator evaporator fan noise

Despite attempts to quiet the 2 year old fan, I went ahead and replaced it. Part Select was prompt with a new one at my door less than 24 hours. It was just the fan motor, so took a couple extra steps to place it in the metal housing, but no problems and though the frig still makes noises, it's not coming from the fan as before.

Parts Used:

Evaporator Fan Motor

Alan from Sunapee, NH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

6 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Frig too warm

Followed the instructions on the repair video and it made very easy. Also saved us a lot of money. Thanks for your help.

Parts Used:

Evaporator Fan Motor

Judith from Port Mansfield, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

EVAP fan motor wore out, fan hits flange in back panel

Took back out of freezer compartment, pulled plug and removed old motor, inserted new parts. It was
easy and the parts arrived the day after I ordered
online, even though I chose the cheapest shipping
option. Nothing in my freezer had a chance to thaw
out.

Parts Used: