GR-X30FGNGM (AGRCNA0) LG Refrigerator - Overview
Sections of the GR-X30FGNGM
[Viewing 11 of 11]
Keep searches simple, eg. "belt" or "pump".
Plastic Tube - 5/16 Inch
PartSelect #: PS3536013
Manufacturer #: MJU62070602
$32.95
In Stock
Order within the next 7 hrs and your part ships today!
WATER INLET VALVE
PartSelect #: PS3618979
Manufacturer #: AJU72992603
$120.78
In Stock
Order within the next 7 hrs and your part ships today!
Refrigerator Ice Maker
PartSelect #: PS10063167
Manufacturer #: AEQ73130004
Designed for efficient ice production, this ice maker assembly includes the ice mold and control unit that work together to freeze and release ice. Water enters through the inlet valve and is held in ...
$324.43
In Stock
Order within the next 7 hrs and your part ships today!
FAN ASSEMBLY
PartSelect #: PS16546769
Manufacturer #: ADP73273402
This fan assembly circulates air to regulate temperatures and support efficient operation. Proper airflow improves performance and helps protect internal components. Replacing a failing fan assembly r...
$54.95
In Stock
Order within the next 7 hrs and your part ships today!
DC Motor
PartSelect #: PS7791867
Manufacturer #: EAU59551204
Is your LG Refrigerators ice dispenser giving you trouble? It could be that the Dispenser Ice Chute Door DC Motor needs a replacement. This motor is an important gadget that allows the ice door on you...
$64.85
In Stock
Order within the next 7 hrs and your part ships today!
Ice Maker and Auger Motor Assembly
PartSelect #: PS11710299
Manufacturer #: EAU62563503
This assembly is the complete ice maker and auger motor contained on the mounting bracket. This is a genuine OEM part.
$464.91
In Stock
Order within the next 7 hrs and your part ships today!
Ice Bank Door Gasket - White
PartSelect #: PS11761692
Manufacturer #: MDS62111103
If your fridge isn’t making ice like it used to, the gasket on the ice bank door might be the problem. This replacement part helps keep warm air out so your ice stays solid and your fridge runs effici...
$108.50
In Stock
Order within the next 7 hrs and your part ships today!
Tube Connector
PartSelect #: PS3583936
Manufacturer #: 4932JA3002C
$31.85
In Stock
Order within the next 7 hrs and your part ships today!
ROLLER
PartSelect #: PS7796091
Manufacturer #: MHA62513601
$17.55
In Stock
Order within the next 7 hrs and your part ships today!
VALVE,WATER
PartSelect #: PS11712338
Manufacturer #: MJX62831301
This water valve precisely controls water intake to ensure correct filling during operation. Proper flow regulation helps protect the appliance and supports consistent performance. Replacing a faulty ...
$109.09
In Stock
Order within the next 7 hrs and your part ships today!
Common Symptoms of the GR-X30FGNGM
[Viewing 5 of 5]Leaking
Fixed by
these parts
these parts
Show All
Not dispensing water
Fixed by
these parts
these parts
Show All
Ice maker not making ice
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Water feed line running from water valve to filter housing was leaking
Shut off water supply. Disconnect main supply line. Remove rear lower panel on back of refrigerator. Remove all tubing clamps on back. Disconnect leaking tubing from water supply valve. Remove water filter and unscrew/remove water filter housing. Replace tubing - connect to water filter housing then to water supply valve. Reconnect filter housing and filter. Reinstall lower panel, then main water supply line, then all tubing clamps. Turn water back on and check for leaks after discarding several glasses of water to fill filter. Job complete!
Parts Used:
-
Tom from EASTON, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
13 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker Quit Making Ice
For this model the ice maker is very easy to replace. All it takes is a phillips head screwdriver. There are two wire connections you have to unplug. Easy out easy in. You do not have to disconnect the water line, just make sure the line is lined up correctly when you reinstall the new icemaker. It seems to take approximately 8 hours before you start getting ice again. If you have this same model, you already know this ice maker is very slow in making ice and is not able to keep up with daily usage of ice for a household of 3.
Parts Used:
-
Jeff from HUMBLE, TX
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
8 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fridge waterline for ice maker / door water
The heavy work is moving the fridge, then take off the lower plans. Use a bowel or cup for screws and the water line connector spacers so you don't loos them.
undo connections holding water line, including the bottom brakes for the solenoid. Reuse the spring around the lower waterline to prevent external wear on the line.
NOTE: remove the waterline connector spacers and save!
NOTE: you must compress (not pull) the connect to then pull the waterline out of the connectors.
NOTE: You must also remove the water filter and housing inside the fridge but this is easy.
MOTE: Test the line for leaks by turning on the water and then using the door water. The filter will need to refill so it may take a minute before water comes up. This line only have pressure when the door water is used or the ice maker needs to make ice.
After replacing the line, test the line for leaks by using the door water so the solenoid fills the lines
undo connections holding water line, including the bottom brakes for the solenoid. Reuse the spring around the lower waterline to prevent external wear on the line.
NOTE: remove the waterline connector spacers and save!
NOTE: you must compress (not pull) the connect to then pull the waterline out of the connectors.
NOTE: You must also remove the water filter and housing inside the fridge but this is easy.
MOTE: Test the line for leaks by turning on the water and then using the door water. The filter will need to refill so it may take a minute before water comes up. This line only have pressure when the door water is used or the ice maker needs to make ice.
After replacing the line, test the line for leaks by using the door water so the solenoid fills the lines
Parts Used:
-
Todd from MARS HILL, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!