All Installation Instructions for General Electric Dishwasher GHDA480N10BB

NONE

UNPACKED WHEELS AND CLIP. USING NEEDLE NOSE PLIERS SQUEEZED WHEEL TIP TO INSERT IN WHEEL. REMOVED OLD WHEELS AND RETAINER BY HAND. INSTALLED NEW WHEELS INSTALLED AND NEW RETAINERS

Parts Used:

Lower Rack Wheel Kit - 8 Pack

Edward from GRAND BLANC, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Lost cap to rinse aid disoenser

Just screwed it on.

Parts Used:

Rinse Cap Assembly

MarilynNegri from BLAIRSTOWN, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

basket for silverware was broken

opened the box , new one was an exact fit, pulled out the old one and dropped the new one in place??, this is more of a review, the new part was the exact same one...perfect!

Parts Used:

Silverware Basket with Lids

Mary from Sykesville, MD
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Jet dry rinse cape destroyed.

Got the part the next day.. opened it and just screwed into place!
Easy as could be. Thank you!!

Parts Used:

Rinse Cap Assembly

Jessie from TYLER, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Rinse aid cap leaking

Opened the door on dishwasher and installed the rinse aid cap. Checked for leaks. None found

Parts Used:

Rinse Cap Assembly

David from BURKBURNETT, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Old parts showing wear

Watched a YouTube video on disassembly, parts replacement, and reassembly.

Parts Used:

Fine Filter

Fine Filter Hub Nut

Suzanne from CHEYENNE, WY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

One axle cracked and broke off; another wheel was had fallen off and was distorted when it hit the heating element.

Removed all 8 wheels and inserted the new one after inserting the axles into each wheel. Replacement wheels had a much better connection to the bottom rack and do not anticipate any problems in the future.

Parts Used:

Lower Rack Wheel Kit - 8 Pack

Sheila from DEERFIELD, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

We had a rip in our tub gasket.

I removed the old seal, cleaned behind it, and then put the new seal in. We saw a video on You Tube on how to do it. Partselect also sent instructions on a e mail with the order receipt. We enjoyed working with you guys. Your customer service representative was very nice and accurate in sending out the part. All went as she said it would. Thanks!!

Parts Used:

Tub Gasket

Estelle from Queen Creek, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

dishes where not clean after washing

change the nozzles and filter

Parts Used:

ARM SPRAY UPPER Assembly

Lower Spray Arm - Gray

Middle Spray Arm

Fine Filter

Daniel from Maurice, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

7 of 18 people found this instruction helpful.

Was this instruction helpful to you?

main control board malfunction

Diassembled the door from the insside and installed new board as instructions specified.
Frustration is that this is the second time I have had to replace for the same dishwasher....

Parts Used:

Main and Tactile Board Kit

Kenneth from Hudson, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

4 of 9 people found this instruction helpful.

Was this instruction helpful to you?

dishrack was worn and causing chips on dishes

just slid the new rack into place

Parts Used:

Dishwasher Lower Dish Rack with Wheels - Gray

Kathleen from LOUISVILLE, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Detergent cap would not stay closed

After removing the screws, the front of the dishwasher easily came off. I put 2 screws back in to hold the control panel in place. I did not want that to dangle while replacing the part. The part came off easily after removing the screws. Everything went together easy.

Parts Used:

Detergent Dispenser with Rinse Cap

Michelle from Carlisle, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Top rack had the plastic coating coming off

Had to replace the top rack in the dishwasher. Removing the top rack was a tricky. Have to push the tab out not in on the stopper ends of the rack. Unscrew the bolts on the water sprayer. Need to slide the sprayer instead of unclipping it. Real easy to do once it is realized. Should have taken 30 minutes if I knew this in advance

Parts Used:

Upper Dishrack with Wheels

Chester from North Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The detergent dispenser latch was broken

The repair was easy. Removed all the screws from the inside door panel, approx. 11. Watch out for that last screw as there isn't anything else holding the outside panel, inside panel and control panel together other than those screws. I then unplugged the old dispenser backed out another 6 screws and replaced the old dispenser with the new one. Put it all back together within about a half hour.

Parts Used:

Detergent Dispenser with Rinse Cap