This OEM ice and water filter fits side-by-side and bottom-freezer GE models. The most common reason you would need to change this part is if you have never updated your model and it is no longer filt...
This 40-Watt light bulb is sold individually.
It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges,...
Enhance the functionality of your Samsung or General Electric refrigerator with the Door Mullion Spring. A genuine replacement part directly from Samsung, this crucial piece ensures the smooth opening...
$7.95
In Stock
Order within the next 11 hrs and your part ships today!
This is a replacement spring pin for French door-style refrigerators. This part is made of white plastic and is approximately ½ an inch in length. If the mullion that keeps the doors closed is not wor...
This part is the replacement French door hinge for your refrigerator. It is made of white plastic and is approximately 1 ¼ inch by 1 inch. The French door hinge can also be known as the flipper hinge....
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
This part houses the water filter and connects the water lines.
$331.55
Special Order
Questions And Answers for GFSS6KEXBSS
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joseph
August 11, 2023
Hi, The back of my French Door GE Fridge keeps icing up. Right now it is happening almost weekly and I have to defrost it and then it ices up and gets a little warm again. The temp. still says 38 but you can tell it is warmer in there. The Freezer is fine. I purchased and changed out the Evaporator Fan Motor and also had the defrost sensor replaced by a repair person who said that it was the only part with a slightly bad volt reading. Next he would like to replace the controller board. Does this sound like a logical next step?
Thanks for any help!!
For model number GFSS6KEXBSS
Hello Joseph, thank you for reaching out. Based on the description you have provided, we would recommend checking the defrost heater, part number PS2322740, to fix the issue. We hope this helps!
Unscrew old filter and remove(counterclockwise). Line up arrow on new filter with arrow on connection housing. Turn clockwise till resistance met. Do not overtighten. Follow directions. Simple.
The installation video notes that the door mullion spring has a bent end, and that the bent end of the spring is to be inserted into the LOWER hinge. However, on my refrigerator door, the bent end of the door mullion spring must be inserted into the UPPER hinge in order for the door to function properly. (Also noted that in your video the installer manually closed the door mullion rather than just closing the refrigerator door, another indication that the installation of the spring was incorrect.) After watching the video several times to confirm I was installing the door mullion spring according to the video instructions, I tried inserting the bent end of the door mullion spring into the upper hinge, which proved to be the correct installation of the door mull spring. What should have been a 5 minute repair turned into an ½ hour repair.
