This is a genuine Frigidaire part for your refrigerator. This is an ice maker, which connects to the water lines to provide fresh ice. The most common reason to replace this part is if your refrigerat...
The PurePour water filter is compatible with Frigidaire, Frigidaire Gallery and Professional side-by-side and French Door refrigerators with PurePour ice and water filtration. This genuine Frigidaire ...
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
This temperature sensor, also known as a thermistor, is responsible for preventing the evaporator within your refrigerator from overheating during its defrosting cycle. This sensor is compatible with ...
If your fridge isn’t cooling evenly or feels warmer than usual, this evaporator fan motor might be the issue. It helps move cold air around inside the fridge and freezer so everything stays at the rig...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Elida
December 8, 2024
I need the drawer for the freezer
For model number FRSC2333AS6
Hi Elida, Thank you for reaching out. The Freezer Basket for this model is listed as PartSelect Number PS16543842. Thank you for the inquiry, good luck with the repair!
I need replacement shelves for the refrigerator door
For model number FRSC2333AS6
Hello Stephanie, thank you for contacting us. The dairy bin for your model is part number PS16543757. The two upper door bins are part number PS16543837. These are sold individually. The middle door bin is part number PS16543834, and the lower door bin is part number PS17629875. We hope this helps.
Hi Barbara, thank you for reaching out. The issue seems to be with the dispenser solenoid, part number PS12705180. You may need to replace it to fix the issue. We hope this solves your problem!
Where can I purchase a water filter bypass for the ice and water dispenser?
What is the manufacturer’s part number?
Thanks
For model number FRSC2333AS6
Hello Al, thank you for contacting us. The manufacturer part number for the water filter bypass that you are looking for is A15601102. The part is available on our site with part number PS16544517. We hope this helps.
Simple three steps... 1) There's an front section to the ice-maker to take off. One Phillips screw is on the side, one screw is underneath near the inside of the refrigerator wall. Just unscrew and store. 2) There's a small plastic unit just inside the ice maker to take out. It's held in by a small nut that requires about a 4" extension to reach. (You may be able to unscrew the nut with small needle-nose pliers). Just unscrew and take out the unit - the unit functions just to keep the ice maker wiring in place. 3) The wiring looks a mess, but there's just one wiring connector to the ice maker assembly. Unsnap it. The ice maker is not screwed in, it just slides in -- reach in and pull the assembly straight out; when it stops, lower it a bit and it will come free. Reverse the instructions to install the new unit.
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
