FRS26ZNHB5 Frigidaire Refrigerator - Instructions

removed ice maker box and disassembled crusher unit on front of box and installed new housing.

got replacement ice container with ice crusher and dispenser in the door. removed broken one and slid in the new one like a drawer and started crushing ice right away!!

It was a dark and stormy night.....

Husband: AArrgghhh - we need a new refrigerator !!
WIfe: Nope, we just need to fix this one, and I know just how to do it. (partselect.com)
Husband: (of little faith) Fine, miss smartypants, go for it...

0) Wife orders correct parts from partselect.com and they arrive 3 days later.
1) Wife manually removed the two old drawers and the Cover-storage pan (has drawer guides)
2) Wife attempts (unsuccessfully) to remove glass frontpiece from old drawer to put on new one.
3) Husband: "Lemme see that ...
4) WIfer (reluctantly): ...uh.. OK...
5) Husband puts drawer on counter and whacks it with his fist after disloging the front panel with a butter knife.
5) Wife (amazed) wow-nothing broke!
6) Husband repeats process and breaks the second front panel
7) WIfe (silently) Oh darn and shoot
8) Husband (verbally) *&%#!!!
9) WIfe (brightly) That's OK - I can glue it. No Problemo!!
10) WIfe (silently) *&%!!
11) Wife assembles old front panel onto first storage drawer
12) Wife cheerfully glues old front panel #2, prays, then assembles it onto second storage drawer.
13) Wife puts cover-storage-pan in refrigerator and slides top drawer in, noticing more friction and more play than ususal.
14) Wife notices that wheels are not included in the cover-storage-pan
15) Husband: Now we are S.O.L. for sure. We need to buy a new refrigerator.
16) Wife (OK, smugly) repairs herself to the storage shed, where she has cleverly kept the old part, which still has the wheels on it.
17) Wife removes wheels from old part and installs them onto new part without breaking anything.
18) Wife installs both drawers and is inspired to clean out the newly restored refigerator.
19) Husband (amazed) admits that family does not need to buy a new refrigerator after all
20) Teenage daughter emerging from her room in a daze, "Hey, is that a new refrigerator?"
21) Wife makes plans to spend remainder of budget that would be used to buy new refrigerator on pearl ring that she has been coveting.
22) AND THEY LIVED HAPPILY EVER AFTER....

removed drawer in frig then I removed broken shelf replaced with new one no tools needed replaced drawer.
For freezer I had to remove baskets then the screws holding the tracks replaced tracks and put new tracks back ,put baskets back.

I removed the screws that held the the ice dispencer from the bin. I than removed three screws from the bottom of the bin. I put the new plastic piece on the end of the spiral piece that
pushes the ice. I inserted the spiral piece back into the hole. I than screwed the ice dispencer
to the bin and re-inserted it back in the refrigerator.
It took me about 5 to 10 minutes. It's really easy!

Installation was completed by following the online Parts diagram. Had to completely remove all parts, including the blades in ice crusher, and re-assemble. Glad the online diagram was clear and easy to read.

I replaced the solenoid first because the ice maker was not getting water. After replacing the solenoid valve, I waited about 1/2 an hour, still no water. So, I ordered a replacement ice maker. I then installed the replacement ice maker, waited a 1/2 an hour, still no water. Then, I waited overnight. Yeah, ice! WORD OF ADVICE. WAIT OVERNIGHT TO SEE IF THE ICE MAKER CREATES ICE. Not sure how long a cycle takes, but it's longer than you would think. Hope your installation is a success!

The untwisted the water filter took out the old water filter and replaced it with the new one and twisted the cover back on. it was very easy to do and now the water tastes very fresh :) thank you

Unplug fan and remove 3 bolts. I had to bend the fan frame in order to remove fan. Change fan blade and reverse procedure. Fridge is fixed nice and cold

Pull out the unit from the wall, Unplugged the frig, removed the lower cover panel. Remove 2 screws holding the water valve from the unit, then removed the 2 connectors that turn on the relays. Connected the connectors to the new valve, then replaced inside of unit and replaced the lower back panel cover, plugged it back in, then tested the water flow at the spout, and waitied for the ice maker to kick in. Worked perfectly.

Removed the old fan--three small nuts and snap off connection. Ordered part and received the next day. Your company is great!!

Pull refrigerator from wall and disconnect the water line and unplug the power.

On top of the icemaker, two machine screws hold the icemaker to the side of the refrigerator. You will have to feel around to find the machine screws, but once you do, it is simple to slip the appropriate size socket over the hex heads. I found it helpful to have an extension on the socket wrench. Disconnect the power cable inside the refrigerator (there are little pressure clips on the side that help release the cable) and move it out of the way for the time-being.

Back out both machine screws several turns, but do not remove them completely. The icemaker slips over the screws, so leaving them in the side of the refrigerator makes that process a lot easier. Hand tighten the machine screws once you have positioned the new icemaker in place. One thing to be sure and do is make sure the water line hose coming out of the back of the refrigerator inside is on top of the icemaker. It fits into a slot in the top of the icemaker - failing to do this will result in water pouring into the freezer compartment, not into the icemaker..

Reconnect the power cable to the new icemaker and tuck it up behind the icemaker assembly. Tighten the machine screws completely, but do not over-tighten.

Reconnect the water line on the back of the refrigerator at the wall, and plug in the refrigerator. You should hear the unit fill immediately.

In about an hour you should have ice filling the bin. Enjoy!

Watched YouTube video. Very easy. Used my cell phone camera in ‘selfie’ mode propped up in the upper right hand corner of freezer to see the 2 hidden screws.

The site offers a video for this part which worked perfectly. In addition to replacing the part, since the cardboard panel was off, we also cleaned all the dust off of the coils which someone recommended to do annually.

I removed the screws holding the old handle parts in place, and slid the two trim strips out. I attached the new handle and then attached the new trim strip and the old one that was still OK.