Models > FPSC2277RF2 > Instructions

FPSC2277RF2 Frigidaire Refrigerator - Instructions

All Instructions for the FPSC2277RF2
91 - 105 of 245
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken drawer
I took out the broken drawer and replaced it with the new drawer
Parts Used:
Refrigerator Crisper Drawer Crisper Drawer Cover - NO Glass
  • Fatima from STATEN ISLAND, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
routine maintenance
slide old filter out and insert new one
Parts Used:
Air Filter
  • fred from Austin, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Was time to replace my water filter
Twist to remove the old one an twist to install the new 9ne
Parts Used:
Refrigerator Water Filter - White
  • Lewis from JONESBORO, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
4 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker was making ice erratically
After sending PartSelect the info to their troubleshooting dept. about my ice maker, they recommended replacing the ice solenoid. I did so at a cost of $102. No change, turned out replacing the ice maker(did not purchase from PartsSelect) was the issue and works fine now.

So wasted $102. FYI the part took 6 days to arrive.
Parts Used:
Refrigerator Ice Dispenser Solenoid
  • Daune from OCALA, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator wasn't "winterized" ..This is a summer home, the cold winter cracked the water valve
I put the new unit up to the old one to see exactly how it goes, took the 2 screws holding the unt off...Took the 3 water lines off with adjustable wrench, put back exactly the same way and it worked with no leaks
Parts Used:
Refrigerator Water Inlet Valve
  • Jimmy from west sayville, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken cover
took out the glass popped out the cover and put the new one on and put the glass on. DONE
Parts Used:
Crisper Drawer Cover - NO Glass
  • harry from long beach, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left glide for center shelf broke on front corner so the shelf lost support.
Unscrewed bolts, removed broken part and replaced with new glide. The part was slightly longer than original so I had to pound it in a little which slightly bowed the new part, but it works.
Parts Used:
Drawer Glide
  • Pat from FORT MOHAVE, AZ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cracked meat drawer couldn’t find replacement
Parts select had the right part!
Returned others from other sellers that didn’t fit
Took 2 months to get it due to COVID but worth the wait
Exactly the right replacement!
Thanks to parts select
Don’t go anywhere else!!!!!!!!!!!
Parts Used:
PAN-MEAT
  • Dale from ROME, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken shelf holder
You pop the old frame out, take out the glass, slide the new frame in and reinstall the shelf. No tools required. Very easy.
Parts Used:
Meat Pan Cover Frame - Glass NOT Included
  • Suzanne from TAVARES, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Crisper Glass was broken
Took the glass out of the shipping box and it just slid right in. It was a perfect match.
Parts Used:
Crisper Glass Insert
  • David from PFLUGERVILLE, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I let value was leaking its self
Undo a few bolts unplug power and unhook water lines then recut all lines and push in to new value
Parts Used:
Refrigerator Water Inlet Valve
  • Mitchell from FOXWORTH, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
glass shelf was broken.
Well, after watching the video before ordering the part, I ordered the correct part. My wife had ordered the wrong part that I had to return and ordered the correct one. To install the glass you just take out the crisper above shelf and lay the glass in place. So simple.
Parts Used:
Pan Cover Insert
  • Virgel from NEWNAN, GA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Valve body separated : major leak.
Write down where tubing goes, wiring is color coded.
Parts Used:
Refrigerator Water Inlet Valve
  • Robert from NASHVILLE, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Crisper drawer cover and support
Removed broken parts and installed new ones. Only had a little problem getting supports out. I think they had sticky stuff from spills in the refrigerator that made it more difficult.
Parts Used:
Crisper Drawer Cover - NO Glass Crisper Cover Support - Front
  • Roland from CHAMPLIN, MN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water valve was leaking
The u tube instructions were exactly what is needed. I had to cut off the old plastic pipes. My pipe had threaded connectors. Pex push on connection is super easy. You don't really need a block of wood to cut it if you have a sharp utility blade. If if you are sure this is the problem this is a really easy fix. Steps 1 turn off water at wall unplug electric also 2. Disc line at valve on refrigerator 3. Remove 2 screws holding valve 4. Pull valve out and remove plastic hoses and electric connections pay attention to color of pipe and electric connection. Mine were color coded. Had to cut off thread connectors. Reattach in reverse order or do one at a time. Check for leaks.
Parts Used:
Refrigerator Water Inlet Valve
  • Randy from GUYMON, OK
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FPSC2277RF2
91 - 105 of 245