This authentic defrost thermostat is sourced directly from the original equipment manufacturer and is designed for use with Frigidaire freezers. It regulates the internal temperature to ensure the fre...
$38.75
In Stock
Order within the next 7 hrs and your part ships today!
This plastic freezer door key is designed to operate the lock mechanism on upright and chest freezers, providing secure access to the appliance’s contents. Compatible with a range of models, it helps ...
$19.95
In Stock
Order within the next 7 hrs and your part ships today!
This 3.8-watt LED light bulb is designed to illuminate the interior of select refrigerator models, providing bright and efficient lighting when the door is opened. If your current bulb is dim, flicker...
$88.98
In Stock
Order within the next 7 hrs and your part ships today!
The run capacitor is attached to the compressor. This part is 120 volts and 15 mfd. The run capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things froze...
$52.37
In Stock
Order within the next 7 hrs and your part ships today!
This bin can be moved according to space needed. It holds items on the door of your refrigerator. They are sometimes called Cantilever Shelves as they are supported by the back of the shelf itself t...
$92.41
In Stock
Order within the next 7 hrs and your part ships today!
This freezer door gasket is a genuine replacement component designed to create a secure seal when the door is closed, helping maintain consistent internal temperatures and energy efficiency. Finished ...
$217.93
In Stock
Order within the next 7 hrs and your part ships today!
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
$85.93
In Stock
Order within the next 7 hrs and your part ships today!
This genuine OEM hinge mounting screw is designed for use in Frigidaire and Electrolux refrigerators, providing a secure and reliable way to fasten door hinges to the cabinet. Built with a durable hex...
$32.89
In Stock
Order within the next 7 hrs and your part ships today!
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
$32.04
In Stock
Order within the next 7 hrs and your part ships today!
Order within the next 7 hrs and your part ships today!
Questions And Answers for FKFH21F7HWB
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
June 27, 2022
HOW TO I RESET THE FRIDGE
For model number FKFH21F7HWB
Hello Robert, thank you for writing. The reset button on your Frigidaire Freezer is likely on the inside. When you're resetting your Frigidaire freezer, unplug it from the wall for 15 to 20 minutes and then plug it back in. Next, hold down the alarm reset button for three seconds and then press the down arrow three times and the up arrow once. We hope this helps.
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Kevin
September 21, 2023
Freezer won’t freeze and ice building on the back inside of freezer.
For model number FKFH21F7HWB
Hi Kevin, thank you for reaching out. We believe your freezer is having this problem because of a faulty door gasket, part number PS11770643. You may need to replace it to fix the issue. We hope this solves your problem!
Hi Andrea, thank you for the question. The capacity of your model is 20.5 cubic feet. We hope this information helps!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Ethel
March 10, 2026
what does the magnitic senor look like and can I replace it myself?
For model number FKFH21F7HWB
Hi Ethel, thank you for the question. We have attached a link to the door switch image. Yes, you can replace it yourself. First, remove the screws to release the kick plate, reach through the opening in the frame, and push the left side of the old light switch out. Then depress the tab on the right side to fully detach the switch from the frame. Disconnect the wires to remove the old switch. Install the new light switch by first connecting the wires. Align the switch with the hole in the frame and snap it into place. Reposition the kick plate and replace the screws to secure it. We hope this information helps!
Hello April, thank your for writing. The Defrost Thermostat PartSelect Number PS2350702,
located on the back wall of the freezer section in the refrigerator, the defrost thermostat is used to regulate the appliances temperature to keep the refrigerator cold and constant. The part is made of plastic, and has a 4 inch terminal on the white lead and a 6 inch terminal on the red lead. A refrigerator defrost thermostat may need to be replaced if the appliance is experiencing temperature related issues such as: too cold, too warm, frost buildup, not running, or running too long. We hope to hear from you soon.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
This freezer has many screws that hold the cover on the back of the door and assist clamping the edge of the gasket in place. Be sure to just loosen the screws 3/4 the way out, use a flat head screw driver to pry the cover from the door in case over time it is stuck to the door. The new gasket will come in a creative box trying not to kink the gasket itself, but there will be some distortion of the gasket when you get it. Put it in the sun or in hot water. I put it in my dryer for 10 minutes. Remove the old gasket, and start at the top of the door to replace the gasket. TIPS: If the screws are backed out enough, there should not be any problem sliding the back part of the gasket under the cover. When on the sides, do not pull the gasket down to make it easier to slide the gasket underneath the cover. This will distort and lengthen the gasket so it will not fit and thin it out so it will not function well. Once the gasket is in place, tighten the screws being sure to feel along the outside edge of the gasket for any bulging that would indicate that portion of the gasket is NOT under the cover properly.
I accidently threw away both freezer keys to our upright Gibson and G.E. Freezers!!!! I had no luck finding replacements locally, so I got on the internet and came across PartSelect.com. I called them on the telephone; and after giving the model numbers of my freezers, the keys were on their way!! I received the keys very quickly and both worked perfectly. I would highly recommend Partselect.com. Charlotte M. Bishop
The repair was as easy as removing three phillip head screws for each slide rail and removing and replacing the broken slide rail. However, over the years, the walls of the freezer had bowed making the drawer a bit short to ride on the new rails -- causing the drawer to fall off the slide rails since the span between each rail was now wider than the basket. To remedy this problem. I used washers and placed them on the back side of each rail where the screws are located . This was the perfect solution compensating for the extra width resulting from the slightly bowed walls in the freezer. This solution allowed the basket to fit on each slide rail without falling off .
