All Installation Instructions for Frigidaire Refrigerator FGSC2335TDB

Water line retainer missing in one port of new valve

carefully removed retainer from old valve

Parts Used:

Refrigerator Water Inlet Valve

William from DUCK RIVER, TN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Original ice maker not working leaking water water out door

Removed exterior housing, sliding old unit forward to release. New unit went in easily. Caution wires don't get pinched.

Parts Used:

Ice Maker Assembly

Michael from FREE SOIL, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

Cracked crisper

Pulled out the old-put in the new.

Parts Used:

Refrigerator Crisper Drawer

Lynn from NESCOPECK, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Leaking Water Vlave

Just follow the instruction that come with the valve. Easy.

Parts Used:

Refrigerator Water Inlet Valve

Joe from Pittsburg, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set, Wrench set

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Water began to leak from valve

We followed the online instructions and tah-dah it was working...

Parts Used:

Refrigerator Water Inlet Valve

Rebecca from Sapulpa, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)

2 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Water dispenser dripping causing corrosion below tray

Replacement of the water valve repair was a snap. Only the main supply line needed to use a nut to secure the water supply. All other lines were simply cut below the pointed end of the plastic tubing line, nylon nut discarded and simply pushed in to seat with a O-ring fitting. Took no more than 10 minutes to install the new valve and test for leaks after turning water back on. This was the easiest appliance repair I have done in > 5 years, 100% success first time,

Parts Used:

Crisper Cover Support - Front

Scott from Jensen Beach, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

left out in the cold an froze

remove the old one and replace with the new one and yes it was that easy. All of the lines and wiring connectors were color coded

Parts Used:

Refrigerator Water Inlet Valve

Alvin from Barbourville, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

A set scew was ordered twice.

The first order arrived in a huge box and there was no scew to be found, the box had wholes in it. I was given a refund and told to order again.

The repair did not happen and the set screw which was actually recieved the second time was returned because it was the wrong size.

Parts Used:

Screw

Susan from BRAINTREE, VT
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

broken support

had to remove broken by pushing 1pin then remove.
put new one in reset pin done.

Parts Used:

Crisper Support - Rear

william from bellmawr, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Broken crisper supports

The video was very helpfull. They were fixing the same refrigerator that I have. I punched in the set pin on the old part. Removed the old part by prying it out with a putty knife. Inserted the new part and drove in the set pin. I was glad that PartSelect had my parts. The repair shop in Fort Wayne Indiana did not even show this repair part on their computer.

Parts Used:

Crisper Support - Rear

Dale from Fort Wayne, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Cracked frame

Found model
Checked website for part availability
Ordered
Tracked package
Received
Removed old
Placed glass in frame
Placed on rack in fridge
Replaced crisper !!

Parts Used:

Upper Crisper Drawer Frame

Lisa from CYPRESS, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

I broke one of the support wheels out of its seat. It supports the left crisper.

Tried JB Weld, not sufficient.

Got online, looked at the parts fiche for my model, chose the crisper top frame. Wrong part. Sent it back (shipping as $60 on a $125 part).
Ordered the part that the wheel appears to be screwed into (described as crisper support frame. Ordered new $11 plastic wheel as well.

Wrong part. It appears that the crisper drawers on my unit are supported by a monolithic piece (solid plastic) that includes the frame as well as the locators for the wheels. I could send pictures, but have decided to abandon fixing it. (I tossed the metal support that was the second order into the trash ($60 part)....

Parts Used:

Upper Crisper Drawer Frame