FGSC2335TDA Frigidaire Refrigerator - Instructions

Took out old drawer. Removed clips from that drawer in rear and clipped onto new. Removed humidifier control from old and inserted into new. Slid drawer onto track.

Well, after watching the video before ordering the part, I ordered the correct part. My wife had ordered the wrong part that I had to return and ordered the correct one. To install the glass you just take out the crisper above shelf and lay the glass in place. So simple.

Undo a few bolts unplug power and unhook water lines then recut all lines and push in to new value

After sending PartSelect the info to their troubleshooting dept. about my ice maker, they recommended replacing the ice solenoid. I did so at a cost of $102. No change, turned out replacing the ice maker(did not purchase from PartsSelect) was the issue and works fine now.

So wasted $102. FYI the part took 6 days to arrive.

I put the new unit up to the old one to see exactly how it goes, took the 2 screws holding the unt off...Took the 3 water lines off with adjustable wrench, put back exactly the same way and it worked with no leaks

took out the glass popped out the cover and put the new one on and put the glass on. DONE

Unscrewed bolts, removed broken part and replaced with new glide. The part was slightly longer than original so I had to pound it in a little which slightly bowed the new part, but it works.

Parts select had the right part!
Returned others from other sellers that didn’t fit
Took 2 months to get it due to COVID but worth the wait
Exactly the right replacement!
Thanks to parts select
Don’t go anywhere else!!!!!!!!!!!

You pop the old frame out, take out the glass, slide the new frame in and reinstall the shelf. No tools required. Very easy.

Took the glass out of the shipping box and it just slid right in. It was a perfect match.

Remove old one and put in the new one

I first ordered the wrong switch I called and got a return label and was refunded my money before even shipping the wrong switch I was helped for the right switch and it arrived in 5 days the replacement works perfectly very easy to install. Thank you

I removed the old frame and the glass. I put the glass in the new frame and inserted the frame & glass in the shelf brackets. No tools required. Nothing difficult or tricky about the replacement and installation.

It took longer to remove the items from the shelf than to replace the new frame and glass.

Ordered the correct part according to the specifications; took the packing plastic off; and placed it on the crisper. Ta Ta!

The previous tenants broke the glass shelf in the refrigerator and all I did was order the part and place it on the refrigerator shelf. Very simple and I ordered the correct part thanks to the refrigerator diagram the website had.