The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
This vent grille mounts on the top of the microwave above the door. This vent grille is for microwaves.
Vent grille covers components inside the microwave while allowing airflow through the slats....
Mounting hardware sold separately. This part has been redesigned by the manufacturer and may appear different then the original.
$110.56
On Order
Questions And Answers for FGMV174KFA
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephanie
March 5, 2020
Heard a popping noise. Microwave has no power or display, unplugged and tried again. Nothing is coming on.Plug is good because i tried something else in it.
For model number FGMV174KFA
Hello Stephanie, thank you for your question. That is probably an issue with the PartSelect Number: PS466969 thermal fuse, Thermal Cut-Off Part #: PS12114598, THERMAL CUTOUT Part #: PS11724148. We would recommend testing those parts first. I hope this helps!
Hello Bruce, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: Door latch, door spring and the door switches. Check the latch and spring to see if either are broken, and you can test the switches with a multimeter to see if they are faulty. For safety reasons, since the microwave capacitor can still store electricity even when the microwave is unplugged, it is usually advised that you discharge the capacitor before any attempt at repair. We have included a link on how to do so. https://www.partselect.com/Microwave+discharge-capacitor+repair.htm Good luck with your repair.
The microwave has stopped cooking. It turns on and the tray turns but no heating happens.
For model number FGMV174KFA
Hello Gary, thank you for getting in touch. We recommend that you check the door switch, part number PS8769124, magnetron, part number PS1993385, and diode, part number PS2339491, for any damage and then replace the defective part to resolve your problem. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!
Hello María, thank you for getting in touch. There are three light settings in your model: high, medium, and off. Press the light pad once for high, twice for low, and three times to turn it off. We hope this information is useful!
Was this helpful?
Thank you for voting!
Robert
September 30, 2023
Can you replace the fuse on this model?
For model number FGMV174KFA
Hello Robert, thank you for your inquiry. According to our research, there is a thermal fuse, part number PS466969, in the cabinet section of your model. It protects the microwave and magnetron from damage by shutting off the microwave if there is a power surge. You can easily replace it, if it blows out. We hope this information helps!
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
Removed the 3 screws to drop the lower panel and, removeed the turn table plate and ring. Then removed the 2 screws holding the motor, the 2 wires attached to the motor and removed the old motor.Replaced the new motor in the reverse order. DO NOT FORGET TO UNPLUG THE MICROWAVE FIRST.
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a 12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .