FGMO226NUDA Frigidaire Microwave - Overview
Sections of the FGMO226NUDA
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Microwave Cover
PartSelect #: PS11766161
Manufacturer #: 5304505675
This microwave waveguide cover, also known as a stirrer blade cover, is an essential component for maintaining optimal cooking performance. It protects internal parts from food splatter while allowing...
$24.95
In Stock
TRAY
PartSelect #: PS12705742
Manufacturer #: 5304519348
Cook your meals evenly with this sturdy glass turntable tray. It fits in the center of your microwave and rotates food for better results. Made from heat-resistant glass and easy to clean, this tray i...
$222.41
Special Order
Common Symptoms of the FGMO226NUDA
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lcd display died .
First problem was there are a lot of different enclosures for NUFA models. After much research, I found a video of a smaller countertop micro that had the same screw pattern as my large Gallery over the stove unit. For my micro, you remove the screws on the back, one screw on the left side, and the entire cover lifts off. I then discharged the capacitor using a pair of insulated needle nosed pliers, and took a picture so I could replug everything correctly. Then removed all of the connectors and one screw holding the board in place, and removed the old board. After that, I just did everything in reverse, and plugged it in. Voila! I was finished. It was a very simple job once I found how to access the control board. Hope this helps, and my thanks for the prompt parts delivery.
Don Crow
Don Crow
Parts Used:
-
Donald from BROWNSVILLE, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!