This oven temperature sensor, also known as an oven probe, monitors the internal temperature of the oven cavity to ensure accurate and consistent heating. Measuring 6 inches in length and made of dura...
$62.31
In Stock
Order within the next 1 hr and 21 mins and your part ships today!
Keep your microwave working efficiently with this replacement glass turntable tray. With a diameter of about 13.5 inches, it offers a sturdy, rotating platform that helps heat food evenly. Made from d...
$192.61
In Stock
Order within the next 1 hr and 21 mins and your part ships today!
Are you having trouble with your Frigidaire, White Westinghouse, Electrolux, or Tappan microwave? When there's an issue with it starting correctly or even accidently when the door is open, you likely ...
$66.56
In Stock
Order within the next 1 hr and 21 mins and your part ships today!
This convection fan blade is designed for use with various makes and models of range and oven and is sold as an individual part. Made of metal and measuring approximately 4.75-inches in diameter, this...
$43.07
In Stock
Order within the next 1 hr and 21 mins and your part ships today!
Got a Frigidaire, Electrolux, White Westinghouse, or Tappan stove, oven, or range? Then, this Frigidaire Circuit Board Assembly could be just the piece you need to get your appliance back to peak perf...
$504.86
In Stock
Order within the next 1 hr and 21 mins and your part ships today!
Are you noticing your Frigidaire range control panel overheating or not cooling properly? You're in just the right place to find a solution. Meet your new best friend: The Frigidaire Cooling Fan Assem...
$232.90
In Stock
Order within the next 1 hr and 21 mins and your part ships today!
Questions And Answers for FGMC2766UFC
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug
November 23, 2024
microwave works oven has no power
For model number FGMC2766UFC
Hi Doug,
Thank you for your question. If there is no power going to the oven we recommend checking the main terminal block, the electronic control board, the oven temperature sensor, and the elements to see which part is causing the issue. We hope this helps!
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
This was the first time replacing the fan. It is a lot easier to work in the oven compartment with the oven door removed, only two screws on the door and the hinges were released. I found that a couple of the screws were either rusted or stripped so I used a pair of pliers to remove the screws that were holding the diffuser in place. Once there was access to the fan I found that the fan was warped and that the blades were scraping against the back wall of the oven. The next challenge was to remove the retaining nut. I used a sheet metal screw to secure the warped fan to keep it from spinning. once I figured out that you have to turn the retaining nut to the right to loosen, it came off easily. 1/2" socket with extension. When I replace the fan I used two washers for spacers to make sure that the fan would not scrape the wall of the oven. Its been tested many times and the oven does not make that horrible sound anymore.
