This oven temperature sensor, also known as an oven probe, monitors the internal temperature of the oven cavity to ensure accurate and consistent heating. Measuring 6 inches in length and made of dura...
$58.25
In Stock
Order within the next 6 hrs and your part ships today!
This convection fan blade is designed for use with various makes and models of range and oven and is sold as an individual part. Made of metal and measuring approximately 4.75-inches in diameter, this...
$43.07
In Stock
Order within the next 6 hrs and your part ships today!
Got a Frigidaire, Electrolux, White Westinghouse, or Tappan stove, oven, or range? Then, this Frigidaire Circuit Board Assembly could be just the piece you need to get your appliance back to peak perf...
$477.90
In Stock
Order within the next 6 hrs and your part ships today!
Are you noticing your Frigidaire range control panel overheating or not cooling properly? You're in just the right place to find a solution. Meet your new best friend: The Frigidaire Cooling Fan Assem...
$232.90
In Stock
Order within the next 6 hrs and your part ships today!
Welcome to the Frigidaire Meat Temperature Probe, your top choice for a reliable, effective solution for cooking meat to perfection. This tool is essential for evaluating the internal temperature of y...
$119.43
In Stock
Order within the next 6 hrs and your part ships today!
Order within the next 6 hrs and your part ships today!
Questions And Answers for FGEW2766UFA
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
November 12, 2025
Once it it is up to the correct temperature, it will not maintain it and starts to drop.
For model number FGEW2766UFA
Hi George, thank you for reaching out. According to our research, the temperature sensor, part number PS11758156, is faulty and needs to be replaced. The sensor monitors the internal temperature and signals the control board to cycle the heating elements on and off. If it's faulty, it may send incorrect readings, causing the control board to shut off the heat prematurely or not turn it back on when the temperature drops. We hope this helps.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
This was the first time replacing the fan. It is a lot easier to work in the oven compartment with the oven door removed, only two screws on the door and the hinges were released. I found that a couple of the screws were either rusted or stripped so I used a pair of pliers to remove the screws that were holding the diffuser in place. Once there was access to the fan I found that the fan was warped and that the blades were scraping against the back wall of the oven. The next challenge was to remove the retaining nut. I used a sheet metal screw to secure the warped fan to keep it from spinning. once I figured out that you have to turn the retaining nut to the right to loosen, it came off easily. 1/2" socket with extension. When I replace the fan I used two washers for spacers to make sure that the fan would not scrape the wall of the oven. Its been tested many times and the oven does not make that horrible sound anymore.
Have a double wall oven and the top oven would not shut off or broiler part would stay on and burn tops of food. Since bottom oven was not having any issues felt like it could Not be control panel so decided to try the temp sensor. Since replacing oven has worked properly.
