All Installation Instructions for Frigidaire Refrigerator FFUI1826MB0

Refrigerator door was not sealing correctly.

Remove screws from lower hinge and carefully remove the door. In my case it was the lower bearing, flip door upside down being careful to remove anything which might fall off first. I removed the door stop and then pulled the broken bearing out with pliers. Then I pushed the new one in and reassembled it.

Parts Used:

Hinge Bearing

Edward from Andover, CT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

After installing new ice maker water was not running into the ice maker.

Shut off water supply under the sink. Removed old valve and installed new valve. Turned water back on and within a couple hours the first batch of ice made.

Parts Used:

Water Inlet Valve

Leah from Tecumseh, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers

5 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Shelf was broken

Slid the old shelf out. Attached meat drawer to new shelf and slid it in.

Parts Used:

Refrigerator Shelf (Spill Safe) - White

RALPH from PARIS, KY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Accidentally broke the glass insert.

Simply slide the new glass insert in!

Parts Used:

Crisper Glass Shelf Insert

DAVID from SAN FRANCISCO, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

broken glass on top of crispers

Since the glass was broken and gone I just had to slide the new glass on top of the crispers. This was not really a repair, just an exchange of new for the old.

Parts Used:

Crisper Glass Shelf Insert

Teresa from SOUTHFIELD, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

My Crisper cover was cracked and broken.

I ordered the replacement part. Cleaned out the bottom of my refrigerator, popped in the new part, replaced the food and was siting in my recliner in under 15 minutes.

Parts Used:

Refrigerator Crisper Drawer Cover

Dianna from HALE, MO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The handle on the refrigerator broke at the top

Removed the old handle by taking the screw out at the top and sliding the bottom part off. Then slid the new handle on at the bottom replaced the screw at the top and done. Took less than 2minutes from opening the package to done.

Parts Used:

Refrigerator Door Handle Set (2 pieces) - Black

Pamela from FORT MYERS, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

all items were broken

Simple, all items just clip into place. Took all of a couple minutes.

Parts Used:

Refrigerator Crisper Drawer Cover

Refrigerator Door Shelf Bin

Ron from TUCSON, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Ice maker stopped making ice.

The repair was fast and easy .I removed the ice tray , disconnected the wiring connector and lossend two screws. I removed ice maker assy.and repeated in reverse order to install. I also installed a new water filter. I had ice in about 20 minutes.

Parts Used:

Refrigerator Ice Maker Assembly

Thomas from WESTAMPTON, NJ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Drive great stripped for ice eject. Heater bad

Loosened the 2 bolts 4 turns where it mounts inside the freezer. Lift maker off the bolts unplug 1 plug. Reverse to install.

Parts Used:

Refrigerator Ice Maker Assembly

Danny from PUEBLO, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

The refrigerator door did not come for the opening swing to be reversed

I ordered four bearing hinges and drill holes for the hinges on top and bottom of frezer and fridge doors insert the bearing hinges on the holes and all the other part on the door were able to reversed.

Parts Used:

Hinge Bearing

Benjamin from Jersey City, NJ
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set

10 of 24 people found this instruction helpful.

Was this instruction helpful to you?

door handle broke off

used Phillips screw driver to remove two screws form the top off old handle on top of lower door. slipped new handle on the stud and installed screws in the top of handle .

Parts Used:

Refrigerator Door Handle Set (2 pieces) - Black