All Installation Instructions for Frigidaire Refrigerator FFSS2615TD2

both bulbs blown out

unplug refrigerator and insert the bulb in refrigerator first and then insert the second bulb in freezer side. After which, plug the refrigerator back in.

Parts Used:

LIGHT BULB

Juanita from ORANGEBURG, SC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Freezer started icing up. Gasket was torn in places letting air in.

The most difficult task for me was getting old gasket out. I did call for repair help. The service person was most helpful. After almost giving up, one more tug and the gasket started coming out. Next step was cleaning the area. Aligning the gasket correctly made installation easier. I realized right away that I needed to start in a corner. The gasket went in without a hitch. My freezer is like new again. Next installment will be the refrigerator.

Parts Used:

GASKET-FRZR DOOR,GRAY,MAGNETIC

Shellie from MONCKS CORNER, SC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

ice maker would not dispense cubes, stuck on crushed ice

turn off ice maker, unplug electoral connection, under bottom of ice maker, remove two screws (hex) under bottom of ice maker, lift up on it to unhook it, take it out. (dump out all ice ). remove back plate on back of ice maker (two screws), the solenoid is held in place with two brass screws, remove them, then remove ground wire from solenoid and two wires, that connect to it,(make a note of how wires go back !). put it all back together and your good to go. . i dont think its really the solenoid that goes out, its the housing that encases it, and you have to buy another solenoid thats encased. good luck

Parts Used:

Refrigerator Ice Dispenser Solenoid

steven from TONEY, AL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The replacement substitute stipulated and shipped to us was not compatible with this appliance.

After receipt of the incompatible LED bulb, customer service gave us the phone # of Frigidaire and they helped us to get the correct LED for this appliance. We returned the incorrect bulb to parts Select and are now waiting for a credit to our account at this point. It’s been a long process but our Frigidaire at least is now lighted.

Parts Used:

LIGHT BULB

Gary from CAMAS, WA
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Fridh light bulb blew

Got sent the wrong bulb 3 times had to pay for the three bulbs 75 dollars each Sent pictures of right bulb still wrong bulb no refunds for 30 days I even gave them right part number. Found out that the part number on box but wrong bulb inside told them and they seem not to care ordered from another company still out 225 dollars

Parts Used:

LIGHT BULB

Sandy from DANSVILLE, NY
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Ice maker line was freezing

Pulled the unit out from the wall and with a flat head screwdriver and a utility knife I replaced the valve assembly. It was no problem at all.

Parts Used:

Refrigerator Water Inlet Valve

John from Ellsworth, WI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

none

slid the shelf in place

Parts Used:

Refrigerator Door Shelf Bin

John from SOCIAL CIRCLE, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

crusher housing cracked

Removed ice tray, disassembled ice tray assembly and crusher housing making sure to note the spring location, spring etc, installed new plastic housing making sure to reinstall the spring properly and the fixed crusher blade into the notch cutout., reassembled ice tray.

Parts Used:

Dispenser Crusher Housing

Adam from Clayton, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken shelf support

I broke off remainder of clip, and used phillip
screwdriver and pushed pin into wall. I lined up new support and pushed in peg to secure

Parts Used:

Crisper Cover Support - Front

Richard from West Seneca, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I was cleaning the refrigerator and I accidentally dropped the insert

I just slipped it into place.

Parts Used:

Crisper Glass Insert

FERDINAND from AURORA, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Light bulb went out

Unscrewed old bulb and put in new one

Parts Used:

LIGHT BULB

Brenda from JONESBORO, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Frame of meat drawer cracked

Took out old frame by removing drawer then lifted frame out. Lifted glass panel out of frame, place glass panel in new frame, places frame back in refrigerator and slid drawer back in. Easiest repair ever and I repair nothing myself!

Parts Used: