Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Linda
May 25, 2023
I have a Frigidaire microwave where the coupler cannot be placed in to the turntable shaft. Was it supposed to have been installed when it was purchased.
For model number FFMV1846VDA
Hello Linda, thank you for your inquiry. We have found that the coupler, part number PS12365458, comes installed in the microwave from the manufacturer. We have found some relevant instructions for you to install the coupler. You may follow the following steps:
1. Unplug the appliance's power cord. Remove the glass tray and pull the old coupler straight up to remove it.
2. To install the new turntable coupler, align it on the motor shaft and push it down.
3. Position the glass tray on the coupler and plug the power cord back in. We hope this information helps!
Looking for black stainless replacement door handle for this model microwave.
For model number FFMV1846VDA
Hi Debbe, thank you for reaching out to PartSelect. The black stainless door handle for your model is part number PS16218378. Glad to be of assistance!
Hello Patricia, thank you for asking. The Height is 16 3/8" and the Width is 29 7/8" with a capacity of 1.8 Cu. Ft. We are pleased to have been able to help.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
The diagnosis is about an hour. Coz, I need to open the control panel, got a tester, and trsted all critical parts inside the panel. Also, replaced the fuse just to make sure its a new one. Found out it was a switch (bottom part) that control the open/close of the microwave door.
When found out the problem, the rest of the work is easy.