This light bulb is for microwaves.
Light bulb illuminates the surface below the microwave or the interior of the microwave.
Because high-voltage capacitors in a microwave can retain a lethal e...
Sold individually. Product Description Charcoal air filter works with some Frigidaire, Electrolux, White Westinghouse, and Tappan models of microwaves. This is a genuine OEM part that works for some m...
Ask our experts a question about this model and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nathan
December 23, 2019
My microwave will trip breaker if you start it but fan lights clock all work fine
For model number FFMV162LBA
Hello Nathan and thank you for writing.
The answer: The microwave is overloading the electrical circuit. In other words, the circuit is rated to handle a certain amount of amps (unit of electrical current), and the microwave is exceeding that amount, causing the breaker to trip. ... The microwave is malfunctioning and pulling too much electrical current. Try putting your microwave in a different outlet that is on a separate breaker. If it is still tripping the breaker the microwave needs to be checked by a technician. We hope this helps. Please contact us anytime.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Kym
January 16, 2020
How do you turn the beeping off!?
For model number FFMV162LBA
Hi Kym. The beeping may be caused by a faulty touch panel. You will probably have to replace it. Thank you for your question and good luck with your repair!
Hello Michael, Thank you for your inquiry. The fuse is normally located behind the control panel and to access it you would normally remove the air grill then remove the screw holding the control panel in place. Good luck with your repair.
My microwave just lost power and stopped working. Everything else has power so it’s not a breaker. Could it be a simple fix or do I need a new one?
For model number FFMV162LBA
Hello Rebecca, thank you for your question. We have researched your model and found that the issue is most of the time caused by the fuse, part number PS12071294. If you require assistance to place an order, please contact customer service. We hope that helps!
What are the size and dimensions for this microwave
For model number FFMV162LBA
Hi Rashawnda, thank you for reaching out. According to our research, your unit has a capacity of 1.6 cu. ft. The dimensions are Width: 29 7/8 Inches, Depth: 15 1/32 Inches, and Height: 16 13/32 Inches. We hope this is what you were looking for!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Let me start by saying that this model microwave is nice, but there shouldn't be a plastic handle placed on it when it is mounted above a gas stove-top. The manufacturer should know this but I guess it was a poor decision on their part.
I popped the inside of the door off of the microwave. I then unscrewed the two screws that were holding the next bracket on and popped it off the door. When you take the second piece of the door off, then the glass and front come apart. You can then unscrew the two screws the hold the handle on. Replace the old handle with the new one and work back in the steps you took. A small tipped screw driver is a must.
My repair worked out to be a cinch! My microwave looked very funny without it's handle. I did a little research on how to replace the handle and after popping the insert out of the inside of the microwave door, I was then able to remove the two screws that held the outside panel of the door (the part with the glass) to the part with the hinges. After removing the screws, I carefully used my trusty butter knife and screw driver to pry and pop the outside panel away. This was the most time consuming part of the job. However, once it was fully off, I unscrewed the screws that held the previous handle on and fastened the new handle with the new screws provided. Popping the door all back together was super easy. However, don't forget to put the screws back in that hold the outter panel on to the part with the hinges. :-) Good luck DIY'ers!!
Lifted the door up and removed entire door, took pry bar and removed the snap on plastic cover very easy. Has plastic snaps on the inside. Then removed the glass window same way. then you can see the two screws holding the handle on. Remove screws, then snap back together making sure you go slowly not to break any plastic snaps.The job was a lot eaiser than I thought it would be. The replacement part was a perfect fit.
