This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
This part releases water from the supply line when it's activated. NOTE: This part may appear different than the original, but is an authorized manufacturer replacement.
This door bin holds items on the door of your refrigerator. They are sometimes called Cantilever Shelves as they attach to the refrigerator door by the back of the shelf. This part is sold individually.
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside yo...
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide....
This OEM white door bin is made of white plastic and is easy to install. It is used to hold items in the fridge, and you'll be able to visually see if the part is broken. This part attaches to the fri...
The run capacitor is attached to the compressor. This part is 120 volts and 15 mfd. The run capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things froze...
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen t...
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity c...
Keep your produce fresh and your fridge organized with this crisper pan cover frame. It fits above the bottom drawer and helps control humidity levels for fruits and vegetables. The frame is sturdy an...
$113.41
In Stock
Questions And Answers for FFHS2622MSF
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ray
17 days ago
i need the water line from inlet valve to ice/maker.#1 in the installation picture of ice/maker breakdown?
For model number ffhs2622msf
Hi Ray, thank you for contacting us. The water tube you are looking for is part number PS429430. We hope that helps!
Hi Jian, thank you for contacting us. According to our research, the model of your refrigerator does not have an air filter. We hope this information is useful!
Was this helpful?
Thank you for voting!
Fred
May 24, 2023
Bottom of freezer has ice every morning. I removed back panel and found metal tray full of ice. I thawed the ice and the water came out the bottom of tray onto freezer floor. No evidence of a drain hose connected to tray. Any ideas as to what is going on?
For model number FFHS2622MSF
Hello Fred, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the defrost heater, part number PS2581596. Before replacing the defrost heater, make sure the door is properly sealed. We hope this information helps!
How do I remove the water filter so I can replace it?
For model number FFHS2622MSF
Hello Leon, thank you for asking. All you need to do is push in on old Filter PS3412266 and it should pop right out. To install the new filter slide it into the housing and push until it locks in place. Press the indicator button for ten seconds to reset after replacing.
how many watts on a generator does it take to run this unit ??
For model number FFHS2622MSF
Hello Alan, thank you for reaching out. According to our research, the running power needed for your model number is 1.02 kW and 8.5 amps. However, refrigerators require 2 to 3 times more power during startup because of the compressor. So, your refrigerator will consume 2 to 3 kW of power at startup and then run at 1.02 kW after some time. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
