This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
This part releases water from the supply line when it's activated. NOTE: This part may appear different than the original, but is an authorized manufacturer replacement.
This door bin holds items on the door of your refrigerator. They are sometimes called Cantilever Shelves as they attach to the refrigerator door by the back of the shelf. This part is sold individually.
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside yo...
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide....
This OEM white door bin is made of white plastic and is easy to install. It is used to hold items in the fridge, and you'll be able to visually see if the part is broken. This part attaches to the fri...
The run capacitor is attached to the compressor. This part is 120 volts and 15 mfd. The run capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things froze...
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen t...
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity c...
Keep your produce fresh and your fridge organized with this crisper pan cover frame. It fits above the bottom drawer and helps control humidity levels for fruits and vegetables. The frame is sturdy an...
This is the replacement water filter base for your refrigerator. It is approximately 3-1/2 inches by 3 inches. It is made of white plastic with two blue water filter receptacles. The water filter base...
No Longer Available
Questions And Answers for FFHS2622MS3
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Oscar
November 29, 2019
Why the temperature indicator is flashing on a single number?
For model number FFHS2622MS3
Hello Oscar and thanks for writing.
A flashing display or siren noise is an error indicator. The temperature that is flashing indicates which side of the Twin Cooling models is the location of the error condition. Please reset the error by unplugging the unit for more than 30 seconds. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
Merle
September 5, 2023
My water dispenser dispenses water on its own. I believe it happens when the freezer is calling for ice.
For model number FFHS2622MS3
Hi Merle, thank you for your inquiry. Based on our understanding of the issue, we would suggest you check the water inlet valve, part number PS7784018, as it is the most likely faulty and may need to be replaced. We hope this sorts out your problem!
Ice maker not producing ice. As recommended, replaced valve, ice maker and filter. Ice maker switch is in On position. Water is not coming down the chute into the ice maker, suggesting it’s still not calling for water. Since it is not even producing ice, I won’t replace the auger. Any other tips?
For model number FFHS2622MS3
Hi Mark, thank you for the question. Since you have replaced some of the most common parts and the issue persists, you may need to check the ice mold thermostat, part number PS1532718, as it is most likely faulty and may need to be replaced. This part monitors the temperature in the freezer to determine when to release the ice into the bin and start a new ice-making cycle. We hope this helps!
How to remove the front of the ice and water Dispenser
For model number FFHS2622MS3
Hi Hasten, thank you for asking. We have found some relevant instructions for you to remove the ice and water dispenser panel. They may not be of the exact same model, but they will help you with the installation. You may follow the following steps: remove the stream by using the putty knife, and start prying it off. Next, take out the screws on the top using a screwdriver and let them go down slowly, and then unplug the two plugs. Press on the locking tab at the back and pull the plug out to remove the display control board. Now, remove the water fountain tube from the clips and then the nozzle. Take out the screws using a screwdriver and slide out the old dispenser assembly. Use the flat disc driver to press on the locking tab at the back and pull the plug out. Finally, remove the old dispenser assembly. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
