This part is the replacement wash arm bearing for your dishwasher. It is made of black plastic and is approximately 1 1/4 inches in diameter. The wash arm bearing allows the wash arm to rotate when th...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
February 7, 2024
Hello,
I have a FDSH4501AS3A that was involved with a utility power issue (ground wire energized from power company). The issue damaged the main mother board which has been replaced. The unit appears to be running through it's cycles but gets a i30 error when it runs. The pump appears to turn on (makes noise and hear water running). Do you know what other parts need to be addressed?
Thank You
For model number FDSH4501AS3A
Hi Joe, thank you for getting in touch. We have researched and found that the error code i30 indicates that there is a drain problem. We would suggest checking the pressure switch. If it is not the issue, we would recommend replacing the drain pump, part number PS16218738, to solve the problem. We hope this helps!
What does code. .30 mean. When plugged in machine makes a constant draining sound. Cannot cancel or restart machine. I did not receive a use and care instruction booklet when I purchased it from Home Depot.
For model number FDSH4501AS3A
Hi Bob, thank you for contacting us. Based on our research, the i30 error code indicates that the dishwasher thinks it has flooded with water. We would suggest checking the pressure switch, part number PS12586275. It senses and controls the water level in the dishwasher. You may need to replace it to fix the issue. We hope this sorts out your problem!
Hello Betsy, thank you for reaching out. According to our research, wash the dishwasher filter by hand in your kitchen sink. If it is extra gross or caked with food residue, let it soak in warm soapy water for about 10 minutes. Use a soft brush to gently scrub the inside and outside of the filter to remove all food particles and buildup. Avoid wire brushes or rough scrubbing that could damage delicate dishwasher filters. Once clean, rinse the filter thoroughly with water. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
