FDPC4221AB3A Frigidaire Dishwasher - Instructions

The new roller just snapped in place.

The bottom spray arm would not turn or fall off the stem assembly, so the dishes would not come clean like usual. The spray arm connects to the stem assembly via two plastic prongs that secure the spray arm. I removed the spray arm from the socket (no tool required) and observed the prongs had worn completely away. I grabbed the power screw driver and removed the assembly (3 screws). I placed the new assembly in place, secured the screws, and attached the spray arm. Finished.

Replaced two springs

Replaced part

Well, first of all I want to thank you for letting me know there were two springs and also for showing the two springs because I had almost ordered from another site the official Frigidare site which did not show the other spring, the right one. I would have ordered the wrong spring. I got a spring from you with shipping (very fast Fed-X) for the price of their spring alone. Also, your site was very helpful in explaining how to put it on and advised to get two which I intended to but only ordered one, It was so easy. Beaucoup thanks!

Unscrewed the old arm, and watched a utube video to place back in properly.

Removed 3 screws, swapped parts - done. Wonderful feeling and saved a service call. Works great.

Thought the problem was a faulty door gasket (there was a gap in the middle of it) so I ordered new(new one had a gap also) replaced it anyway - maybe it was worn out? Still leaked! Had to sit and stare at it and cycle it through. finally realized the spray arm had a hole in the end that was spraying directly into the gap in the door gasket. Hot glued the hole and it stopped so I bought a new spray arm - no leaky!

Just snapped the wheels on and attached the bracket to the existing part.

I first removed the bottom rack and took out the spray arm (which was now in two pieces) I took some steel wool and scrubbed off the melted residue from the old arm. I took the new spray arm out of the plastic and clipped it into the bottom of the dishwasher. It spun around great and so I put the bottom rack back in and told my wife to try to run a load of dishes throu. It ran great, dishes got clean...easy fx!

just slid the wheel on.

Customer Service Rep by day, Super Mom by night. I literally have 5 minutes when I get home before I have to take my son to football. I was not only able to use the bathroom but repair my dishwasher in that amount of time. It couldn't have been easier, opening the package took longer. Note: replacement arm looked slightly different than the original. All you had to do was to spread the side clips and snap into place. I had my dishwasher running as I was running out the door. Now I bet if I had a service person come to fix it, it would have cost me!

watched a video, really easy fix. Solved the problem!

I removed the wires from the heating element. I removed the 2 brass nuts that had split down the side. I replaced them with 2 new brass nuts. Tightened with a wrench. I then installed the missing door spring. The repair itself took about 5 minutes.

Received the part and snapped it in place without any tools. It works great!!!