Need a solution to bring back your LG's cooktop performing at its best? This Black Glass Cooktop from LG is exactly what you need. It's a top-notch replacement part that not only enhances your cooking...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alvin
November 9, 2024
All the Flat top Burners just click and do not heat up. Any idea what part needs replaced?
For model number FD1545TS
Alvin, thank you for your question. If your stove or cooktop igniters won’t stop clicking after the burner is turned off, it may just need a good cleaning. This is actually one of the most common causes of a continual clicking sound. If your cooking gets a bit messy sometimes, food debris can get lodged around the ignition system. You may want to test the Igniter Spark switch harness to see if defective. We hope this helps.
Was this helpful?
Thank you for voting!
Warren
October 27, 2024
The code reads F3 on al the burners
For model number FD1545TS
Hi Warren, Thank you for writing. We suggest checking the wiring going to the Control Board first. Check for loose connections or wear and damage. This error shows when there is a failure along the temperature sensor circuit. The sensor could be faulty or some part of the circuit could be damaged or faulty. The sensor is not getting an accurate reading of the temperature inside your oven causing it to turn the appliance off. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
We had made this determination with the help of a repairman on the phone. I ordered the part and waited for it. It was stuck in West Virginia. After several days after it was expected a repairman fixed my range to the tune of $168. It should have cost $30 (the cost of the part and shipping). Unfortunately I probably won't order from PartSelect again.
