Lint filter assembly. Part has been redesigned. If you are replacing this filter you may also need to replace grille as well. Please see model diagram for correct grille.
This high limit thermostat has a limit of 260 degrees Fahrenheit. Meaning that it will cut out when the internal dryer temperature reaches 260. This thermostat cuts back in when the temperature drops ...
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
This element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is u...
This dryer drum drive motor with pulley for drum belt has reverse threads for the blower wheel. This is a genuine OEM part.
$312.02
In Stock
Questions And Answers for EFMC527UTT2
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kelvin
November 19, 2023
internal lights do not turn on when door is opened.and power applied.
the control panel lights up when the power button is pressed.
the drum does not turn by hand.
can anyone help answer these questions?
For model number EFMC527UTT2
Hello Kelvin, thank you for the great question. According to our research, the drum light turn on whenever the door is opened to illuminate the drum during loading and unloading. Closing the door turns off the light. If light does not come on when the door is opened. The issue is most probably with the drum light assembly. We would suggest replacing the drum light assembly, part number PS12728900, to fix the issue. It is normal for control panel lights to turn on when the power button is pressed. You have mentioned that the drum does not turn by hand. If your drum turns by hand, it means the drive belt is broken. We hope that helps!
Internal lights do not turn on when door is opened Power is on. Drum will spin, looked at belt but no issues or wear the belt it self. Getting error code E HD in Diagnostic mode
For model number EFMC527UTT2
Hi Erik, thank you for reaching out. We would suggest checking the door switch first. If it is fine, the issue could be with the board assembly, part number PS12728916. You may need to replace it to fix the issue. We hope that helps!
Removed the back panel and the exhaust hose.removed the heater element and changed the thermostat wire was melted cut damaged part of wire soldered and rapped with black electrical tap
Main problem was the bearing, replaced the belt and felt seal as well The video instruction was very helpful Was easy with basic mechanical aptitude Dryer running great now All parts from Partselect.com Have ordered from them before and would order from them again