This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$16.47
In Stock
Order within the next 10 hrs and your part ships today!
Order within the next 10 hrs and your part ships today!
Questions And Answers for EFLS527UIW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sherry
October 10, 2022
Do I need special shipping bolts to move the machine? If yes, do you offer them?
For model number EFLS527UIW0
Hi Sherry, thank you for reaching out. We have researched your model number and found that you will need a shipping support kit, part number PS2367801, to move your washer. If you require assistance placing an order, please contact customer service. We hope that helps!
Washer starts, very noisy, and nothing happens, just keeps running. No water enters the machine. When running diagnostics the machine checks fine, water comes in it spins and pumps out the water, but still nothing happens when attempting to wash a load.
For model number EFLS527UIW0
Hi Shell, thank you for reaching out. The following parts need to be checked to fix the issue: the drain pump, part number PS12365827, the belt, part number PS12364058, and the water inlet valve, part number PS16544354. We hope this solves your problem! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
I googled the problem, read the recommendation found the part and read that it was an easy fix. Took the broken part off the door and noticed the broke off piece was in the latch on the machine. Ordered the two parts, paid the $30 2-day delivery. Parts arrived and the machine was up and runnning in under 5 minutes
Remove two screws on attachment plate slide door lock plate out. Disconnect wire harness. Remove two screws on back side. Then reverse the process, done!
P.S. don't pay $32 for next working day it still took 3 days to arrive. doesn't help when your leaving in two.
Ruemove the back panel with a square drive bit. Belt removal was easy: rotate the large whelk while coaxing the belt off with hand pressure from behind. Comparing the old to new belts, the circumference difference was about 2”. Loop the new belt over the small motor wheel and start looping over the big drum wheel; it will be reluctant. Place a small smooth pry bar between the belt and wheel while rotating the big wheel using the bar to keep the belt on the wheel. Then turn the big wheel by hand a few times to assure the belt rides correctly.
