All Installation Instructions for Refrigerator DFSF9VKBABB

no turn on

with my hands

Parts Used:

Refrigerator Ice and Water Filter

edward from orlando, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Needed new water and ice filter

simply read the instructions

Parts Used:

Refrigerator Ice and Water Filter

Marilyn from Green Valley, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Brokjen spring

Lifted out the broken part and replaced with new spring.

Parts Used:

Door Mullion Spring

Sharol from Culdesac, ID
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Ice and Water Filter needed replacement

I watched the video, and noticed that they did not even turn off the water. The replacement took less than 30 seconds once the filter was filled with water.

Parts Used:

Refrigerator Ice and Water Filter

Tim from Fort Worth, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

bad tsting ice cubes/ water

it was easy. Open the fridge,untwist the old filter. Open the new filter, fill with tap water and twist in place. Run water through it for a few minutes to insure it is working and filters the water.

Parts Used:

Refrigerator Ice and Water Filter

Beverly from Jacksonville, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Ice Maker assembly was leaking into cube tray and fusing all cubes together.

Remove Ice maker tray and remove one screw on left side holding wire harness cover on. Remove wire harness cover, disconnect wire harness, pull out Ice Maker Assembly. Install new Ice Maker Assembly, plug in new wire harness & screw harness cover back on.

Parts Used:

Icemaker Assembly

James from RSM, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Water Filter Red Light

Replaced Water Filter (twist off old filter; twist on new.)

Parts Used:

Refrigerator Ice and Water Filter

Charles from Foresthill, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

water tasted funny

Simply twisted off the old water filter, unwrapped the new one and twisted it on.

Parts Used:

Refrigerator Ice and Water Filter

Charles from Enterprise, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

filter change

easy easy easy!!!!!

Parts Used:

Refrigerator Ice and Water Filter

Mary from Elk Grove, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 5 people found this instruction helpful.

Was this instruction helpful to you?

french spring broke

after receiving spring installed spring in seconds. Thanks partselect.com Ryan Cappell

Parts Used:

Door Mullion Spring

RYAN from RIVERBANK, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

needed to replace the filter

replaced the filter with the new one i purchased

Parts Used:

Refrigerator Ice and Water Filter

richard from asheboro, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 3 people found this instruction helpful.

Was this instruction helpful to you?

We misplaced the mounting screws for our handles while moving.

It was easy! I just used an alan wrench to losen the side bolt, then slid the handle into the new mounting screws that I had hand-screwed and then tightened it all up.

Parts Used: