Models > DE106

DE106 Maytag Dryer - Overview

Sections of the DE106

[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Drum Support Roller Kit – Part Number: 12001541
Drum Support Roller Kit
★★★★★
★★★★★
(46)
PartSelect #: PS1570070
Manufacturer #: 12001541
This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and it is recommended to change both at once.
$31.92
  In Stock
Light Bulb - 40W – Part Number: 8009
Light Bulb - 40W
★★★★★
★★★★★
(26)
PartSelect #: PS884734
Manufacturer #: 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$8.82
  In Stock
Tumbler and Motor Belt – Part Number: WPY312959
Tumbler and Motor Belt
★★★★★
★★★★★
(42)
PartSelect #: PS11757542
Manufacturer #: WPY312959
The tumbler and motor belt in your dryer allows the drum to spin during the drying cycle. At 100 inches in length, this dryer drum belt is 3/8 of an inch wide and has five ridges. The belt is black in...
$37.95
  On Order
Roller Shaft – Part Number: WP6-3129480
Roller Shaft
★★★★★
★★★★★
(1)
PartSelect #: PS11743031
Manufacturer #: WP6-3129480
This roller shaft is the axle for the drum roller, also known as drum roller axle.
$13.55
  In Stock
Front Glide Kit – Part Number: 306508
Front Glide Kit
★★★★★
★★★★★
(4)
PartSelect #: PS1804752
Manufacturer #: 306508
This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. A rivet tool is required for this installation.
$17.84
  In Stock
Blower Wheel with Clamp – Part Number: Y303836
Blower Wheel with Clamp
★★★★★
★★★★★
(30)
PartSelect #: PS2200270
Manufacturer #: Y303836
This blower wheel comes with a metallic hub clamp to hold it firmly in place.
$26.76
  In Stock
Lint Filter – Part Number: WP33001003
Lint Filter
★★★★★
★★★★★
(36)
PartSelect #: PS11741039
Manufacturer #: WP33001003
This lint filter screen is slide in styl type of Maytag filter screen. It is most typically used for the 08 and later series of Maytag gas or electric clothes dryers that appear before 1990.
$29.61
  In Stock
Retaining Ring – Part Number: WP9703438
Retaining Ring
★★★★★
★★★★★
(3)
PartSelect #: PS11746909
Manufacturer #: WP9703438
This metallic retaining ring is less than an inch in diameter. It is made entirely of metal.
$8.34
  In Stock
Drum Roller Shaft Washer – Part Number: WP312535
Drum Roller Shaft Washer
PartSelect #: PS11740748
Manufacturer #: WP312535
This roller shaft washer is just under an inch in diameter and is used for some of Whirlpool's brands of clothes dryers.Sold individually.
$16.11
  In Stock
Idler Pulley Wheel – Part Number: WP6-3037050
Idler Pulley Wheel
★★★★★
★★★★★
(1)
PartSelect #: PS11743028
Manufacturer #: WP6-3037050
This part is used to help the belt to rotate the drum. It is white and made of plastic with a metallic bearing in the center.
$23.20
  In Stock
Idler Pulley Shaft Washer – Part Number: WPY312527
Idler Pulley Shaft Washer
★★★★★
★★★★★
(2)
PartSelect #: PS11757538
Manufacturer #: WPY312527
This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.
$16.09
  In Stock
Door Latch Kit – Part Number: 306436
Door Latch Kit
★★★★★
★★★★★
(8)
PartSelect #: PS2029855
Manufacturer #: 306436
This dryer door latch kit comes in two pieces: a door latch, and a door strike. It's used to help hold your door shut to your dryer.
$9.21
  In Stock

Questions And Answers for DE106

Ask our experts a question about this model and we'll get back to you as soon as possible!

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Garry
    December 7, 2019
    I need wiring diagram for this dryer. Came off and pulled all wires off unit.
    For model number DE106
    Hi Garry, sadly we do not have the wiring diagram for this unit. I recommend contacting the manufacturer directly to see if they have this information on hand at 800-344-1274. Thank you for your question and good luck with your repair!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Betg
    December 10, 2019
    My dyer gets really hot but won't dry. Nothing seems clogged up.
    For model number DE106
    Hello Betg, Thank you for the question. I suggest testing the High Limit Thermostat, PartSelect Number PS11740647, The Cycling Thermostat PartSelect Number PS11743793 and the Hi-limit Thermostat PartSelect Number PS11740651. You can test the parts with a Multi Meter to check for continuity. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:

      Common Symptoms of the DE106

      [Viewing 15 of 15]
      Noisy
      Fixed by
      these parts
      Show All
      Will not tumble
      Fixed by
      these parts
      Show All
      No heat or not enough heat
      Fixed by
      these parts
      Show All
      Will Not Start
      Fixed by
      these parts
      Show All
      Takes too long to dry
      Fixed by
      these parts
      Show All
      Door won’t close
      Fixed by
      these parts
      Show All
      Too hot
      Fixed by
      these parts
      Show All
      Will not shut off
      Fixed by
      these parts
      Show All
      Shakes and moves
      Fixed by
      these parts
      Show All
      Marks left on clothes
      Fixed by
      these parts
      Show All
      Will not drain
      Fixed by
      these parts
      Show All
      Timer will not advance
      Fixed by
      these parts
      Show All
      Pumps but will not spin
      Fixed by
      these parts
      Show All
      Will not agitate
      Fixed by
      these parts
      Show All
      Shuts off too soon
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      noisy rollers, broken latch
      first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of the front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job.
      Thank you.
      Parts Used:
      Door Latch Kit Drum Support Roller Kit
      • gerry from west covina,, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Wrench (Adjustable), Wrench set
      630 of 655 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The blower fan (nylon) stripped off the motor shaft (steel)
      Removed the front cover (screws on bottom 0f face)...removed blower cover....spring pliers to remove and install blower fan. the rest of the time was spent cleaning the inside of the shell as well as the vent. Reassembled and dryer runs better than it has for many years.
      Parts Used:
      Blower Wheel with Clamp
      • Stephen from Lafayette, IN
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Nutdriver, Pliers, Screw drivers
      558 of 561 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      electric dryer was rumbling - wheel or belt?
      Unplugged dryer. Front came off easily. Removed front of blower. Wheel came off fairly easily - could then see that shaft of motor was circular with flattened side but inside of old wheel was rounded. New wheel popped right on. Took tumbler off so I could clean lint out more easily and get a good view of how the belt threaded through. Put the tumbler back on and reached back with both hands to thread it. Took a half dozen tries until I was sure it was seated correctly and not twisted. Put front... of dryer back on. So far (a week or so) the rumble is gone. Seems blower wheel was the cause of the rumble. Belt didn't seem worn but replaced anyhow.
      Parts Used:
      Tumbler and Motor Belt Blower Wheel with Clamp Lint Filter
      • Raymond from West Bend, WI
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        More than 2 hours
      • Tools:
        Pliers, Screw drivers, Socket set, Wrench (Adjustable)
      588 of 691 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!