This special grommet is an original part which is specially designed for use with DeWALT and Porter Cable staplers and nailers. It is utilized to secure the pin that holds the adjuster. This is a high...
This authentic manufacturer-sourced component is specially designed for DeWALT power tools. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Refer t...
This is an authentic DeWalt replacement part that has been sourced from the original manufacturer to be used with nailers and reciprocating saws. The metal screw is used with several different types o...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
May 9, 2024
Nail gun won’t sink staple’s fully
For model number DCN681B
Hi Chris, thank you for getting in touch. Based on the description that you have provided, we would recommend checking the pusher assembly, part number PS12530603, to fix the issue. We hope this solves your problem!
1. Use belt clip on staple gun to hold in place on workbench. 2. Use a hammer with a punch or small screwdriver to hit the two pins holding the end cap to the magazine. Repeat ad nauseum with as much force as you can muster until both pins come out and the broken end cap can be removed. 3. Align new end cap on magazine and use same procedure to drive pins. Exercise caution with the shorter of the two pins. If not perfectly aligned, the plastic tabs on the end cap can easily break off.
