This authentic, white Drum Bearing Slide, also known as the bearing drum slide, glide, or pad, is a plastic, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for ...
This original equipment manufacturer Drum Bearing Slide is a plastic, green, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for easier movement. You'll know if...
If your dryer’s making loud noises or the drum seems shaky, this rear bearing sleeve might be the fix. It helps the drum spin smoothly and stay in place. When it wears out, you might hear squeaks or n...
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...
This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r...
This is considered a high limit thermostat. Rating - L210 This thermostat acts as a safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this pie...
No Longer Available
Questions And Answers for DBXR463EB0WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
September 29, 2021
How to disassemble to obtain slide to replace?
For model number DBXR463EB0WW
Hi Robert,
Thank you for your question. Here is a link to one of our YouTube videos that you may reference on how to install the slides. The dryer in the video may appear different from yours, but it will give you a general idea on how to install the part. We hope this helps! Good luck with the repair!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Judy
April 14, 2023
How do you remove and replace lint chute assembly
For model number DBXR463EB0WW
Hi Judy, thank you for reaching out. We have searched and attached a video that will help you replace the lint chute assembly. We hope this video helps!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Lisa
April 10, 2024
How do you remove and replace the Drive belt?
The dryer starts to turn on, but will not spin.
For model number DBXR463EB0WW
Hello Lisa, thank you for contacting us. We have attached a relevant video to remove and replace the drive belt. The video may not be of the same exact model but will help you with the process. We hope this helps!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Alexander
December 5, 2024
I have been troubleshooting my dryer on why it won't start. When I turn the start knob I hear the timer start. I checked the door switch and it's working properly as well as checking the start knob. Could I potentially have an issue with the timer selector not working properly or should I be looking elsewhere.
For model number DBXR463EB0WW
Hi Alexander,
Thank you for your question. If the door and start switches are working normally, we would recommend checking the timer and the drive motor. Before removing and checking these parts for continuity with a multimeter on the Rx1 setting, unplug the dryer from the electrical outlet. For the motor, you should receive a reading zero or close to zero. Place one probe on the bare metal housing of the motor, and place the other probe on each terminal one at a time to check the ground connection. You should not receive any reading from this test. If your motor fails either of the tests above, you will need a replacement motor. For the timer, you should receive a reading of 2000-3000 ohms. If you receive any other reading, you will need a replacement timer. We hope this helps!
Serial # VD737037A, I need a lint remover for this model
For model number DBXR463EBOWW
Hello Benna, thank you for contacting us. The dryer lint filter for your model is part number PS11767017. If you require assistance to place an order, please contact customer service!
First of all, unplug the dryer. I removed the two screws on the front of the cabinet to remove the top. I then took out the screws to remove the dial panel. Release the belt for the drum through the access hole in the rear of the dryer. Remove the front cover and pull the drum assembly out.
Remove the element disc from the rear of the housing, take note of the the wireing placement. Replace disc and reverse order of disassembly.
This job was easy for me as I am a tinkerer by nature. The hardest part of the whole job was waiting on the part, which by the way was ordered on a Sunday evening and I had the replacement in my hands and back in the dryer running by 1:00 PM on the following Tuesday!
I book marked this website and WILL refer it to others who simply need a repair, not a costly new appliance!
I pried out the remaining pieces of the handle out of the door with a screwdriver. When the new part arrived, I snapped it into place and it was done. It fit perfectly.
