Models > CGR3740ADW

CGR3740ADW Magic Chef Range - Overview

Sections of the CGR3740ADW

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 8009
Light Bulb - 40W
★★★★★
★★★★★
(28)
PartSelect #: PS884734
Manufacturer #: 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$14.91
  In Stock
Flat Style Oven Igniter Kit – Part Number: 12400035
Flat Style Oven Igniter Kit
★★★★★
★★★★★
(43)
PartSelect #: PS1573892
Manufacturer #: 12400035
The flat style gas oven igniter included in this kit has a body length of 3-3/4 inches. This kit comes with all of the pieces you need to replace longer ceramic igniters, though this kit can also repl...
$73.46
  In Stock
Sealed Burner Cap with Electrode – Part Number: WP3412D024-26
Sealed Burner Cap with Electrode
★★★★★
★★★★★
(2)
PartSelect #: PS11741733
Manufacturer #: WP3412D024-26
This burner cap assembly is sold with the spark electrode. Please note this part has been redesigned and no longer requires a gasket. Sold individually.
$90.93
  In Stock
Short Oven Sensor Kit – Part Number: 12001655
Short Oven Sensor Kit
★★★★★
★★★★★
(21)
PartSelect #: PS2003225
Manufacturer #: 12001655
This temperature sensor detects the temperature within the oven cavity.
$58.89
  In Stock
LEVELER-FOOT,SCREW,F/S,NYLON – Part Number: W11665456
LEVELER-FOOT,SCREW,F/S,NYLON
★★★★★
★★★★★
(7)
PartSelect #: PS16875974
Manufacturer #: W11665456
This leveling leg is two inches long. It is all black in color and it is made entirely of plastic.
$26.92
  In Stock
Door Gasket – Part Number: WPW10162384
Door Gasket
★★★★★
★★★★★
(19)
PartSelect #: PS11749287
Manufacturer #: WPW10162384
This oven door gasket comes with built in retaining clips.
$110.88
  In Stock
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(5)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.43
  In Stock
Oven Rack – Part Number: WP7801P173-60
Oven Rack
★★★★★
★★★★★
(4)
PartSelect #: PS11744745
Manufacturer #: WP7801P173-60
Used in the lower oven. Sold individually.
$115.19
  In Stock
Screw - 10-16 x 1 – Part Number: WP3387230
Screw - 10-16 x 1
★★★★★
★★★★★
(1)
PartSelect #: PS11741409
Manufacturer #: WP3387230
This screw is sold individually.
$10.11
  In Stock
Spark Module - Surface Burners – Part Number: 12001596
Spark Module - Surface Burners
★★★★★
★★★★★
(4)
PartSelect #: PS2003170
Manufacturer #: 12001596
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$84.93
  In Stock
Storage Drawer Wheel and Shaft – Part Number: 12001527
Storage Drawer Wheel and Shaft
★★★★★
★★★★★
(1)
PartSelect #: PS2003113
Manufacturer #: 12001527
This wheel and shaft is used to open and close the bottom storage drawer of a range/stove.
  No Longer Available
Door Hinge - Left or Right Side – Part Number: WP74011140
Door Hinge - Left or Right Side
★★★★★
★★★★★
(2)
PartSelect #: PS11744423
Manufacturer #: WP74011140
Each hinge is sold seperately.
$131.20
  In Stock

Questions And Answers for CGR3740ADW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Darr
December 23, 2023
How to replace oven igniter
For model number CGR3740ADW
PartSelect logo
Hello Darr, Thank you for your inquiry. We show the compatible igniter for your model as part# PS1573892 and we do have an installation video for this part listed. Good luck with your repair.

Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the CGR3740ADW

[Viewing 10 of 10]
Gas igniter glows, but will not light
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Gas smell
Fixed by
these parts
Fixing Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven would not work but the Broiler did
The oven had been working intermittently for a while and after repeated threats of starvation from my spouse I finally took a look even though it was summer and the grill was working fine. The Igniter would glow red when the oven was turned on but the gas would not flow to it no matter what the temperature setting. I searched online and found this site that explained it was possible for the igniter to glow but if it was not drawing the correct amperage (because its resistance was too high) then the main brain would not allow the gas valve to open. So I took a look at the broiler and it had the same igniter. I measure the resistance of both of them and the oven igniters resistance was higher (don't rememeber the reading) then I moved the Igniter from the broiler to the oven and the oven worked from there it was just a matter of ordering the part. End of story except for I am still doing all the cooking on the barbecue outside.
Parts Used:
Flat Style Oven Igniter Kit
  • James from Ferndale, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
337 of 371 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F1 code - gas over would not heat.
Repair tech checked oven and said the control panel was bad and needed to be replaced. The new control panel would cost over $450.00! I found that the oven sensor was bad and replaced it for $30.00. The old oven sensor had failed following a self cleaning cycle. I found that the wires coming out of it were burnt.

Replacing the oven sensor was very easy. I removed the back panels 6 screws to gain access to the sensor's connection. I then removed the 2 screw that hold the sensor in place inside the oven and pulled the old sensor out through the oven. I reversed this process to place the new sensor in the oven.
Parts Used:
Short Oven Sensor Kit
  • george from birmingham, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
170 of 182 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A burner wouldn't spark strongly enough to light the gas.
Replacement of these burners is very easy. You just twist the burner counterclockwise a quarter turn and pull it out. (You may need a big wrench if the range is very old.) Once out, just pull the two wires off and push them onto the new burner. Crimp them on with pliers if they're loose -- mine were. Twist the burner back on.
If the gasket under the burner has disintegrated, don't worry about it. They don't offer replacements for them because they're not necessary as a safety feature. They were designed to keep overspills from running under the cooktop, but the ridge around the hole is likely higher than you'd ever need.
Parts Used:
Sealed Burner Cap with Electrode
  • Matthew from Brookfield, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
167 of 183 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!