Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside yo...
The 6” radiant cooking element with limiter fits under the glass cooktop and supplies heat to the cooking area. If your element is not heating, you can test the element for continuity with a multimete...
This convection fan blade is designed for use with various makes and models of range and oven and is sold as an individual part. Made of metal and measuring approximately 4.75-inches in diameter, this...
This part has been replaced by the manufacture. It may differ in appearance but will still function the same.
$185.50
In Stock
Questions And Answers for CGEF304DKF2
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marc
May 7, 2024
My stove will stop working, as if a breaker blew, but it's not the breaker because the stove flashes, it still has power. So I have to reset the clock and start over. It seems like it gets to hot, maybe? We had a guy come out to look at it, he said something about a relay. It's going to cost about $550 , that to me is crazy. Can I help? My husband is very handy so if it's a cheap part, he can do it
For model number CGEF304DKF2
Hello Marc, thank you for reaching out. We would recommend checking the wire harness regarding the control board to make sure that they are intact. If the issue persists, then you may need to check the control board, part number PS2373512, to solve the problem. Glad to be of help!
Front left surface element will not turn off, do I replace the infinity switch?
For model number CGEF304DKF2
Hi Tina, thank you for reaching out. Your model comes with the surface element board, part number PS2373701, instead of a separate infinite switch. It accepts user dial commands and communicates with the heating elements to regulate cooktop temperatures. You may need to replace it to fix the issue. We hope this sorts out your problem!
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
