If your microwave door handle is loose, cracked, or missing, this replacement handle is a great solution. Made from stainless steel and finished in black, it’s designed to fit a variety of models acro...
This light bulb is for microwaves.
Light bulb illuminates the surface below the microwave or the interior of the microwave.
Because high-voltage capacitors in a microwave can retain a lethal e...
This round glass tray fits select microwaves and measures about 13 1/2 inches across. It holds food and turns during cooking to help heat it more evenly. The tempered glass has grooves underneath that...
This microwave door switch works with the door latch to control when the appliance can run, a worn switch may cause the microwave to lose power, fail to start, or trip a breaker, it fits select upper ...
This microwave waveguide cover protects key internal components by blocking food particles, grease, and moisture from entering the waveguide area. Located on the interior wall of the microwave, it hel...
Sold individually. Product Description Charcoal air filter works with some Frigidaire, Electrolux, White Westinghouse, and Tappan models of microwaves. This is a genuine OEM part that works for some m...
A loose door, repeated clicking, or intermittent operation can indicate a damaged latch body or switch holder. The housing aligns the safety switches with the door hooks and helps prevent operation wh...
This coupler is a replacement mechanical component used to connect and transfer motion between internal assemblies. It is commonly replaced when wear causes slipping, noise, or loss of function.
$37.45
Special Order
Questions And Answers for CFMV157GCA
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
September 19, 2025
The handle is broken out of my microwave door and part of the glasses is broken so I will need to replace the whole door in the handle. Would this be possible?
For model number CFMV157GCA
Hi Scott, thank you for reaching out. Yes, the oven door for your model is part number PS17996271. We hope this is what you were looking for!
Let me start by saying that this model microwave is nice, but there shouldn't be a plastic handle placed on it when it is mounted above a gas stove-top. The manufacturer should know this but I guess it was a poor decision on their part.
I popped the inside of the door off of the microwave. I then unscrewed the two screws that were holding the next bracket on and popped it off the door. When you take the second piece of the door off, then the glass and front come apart. You can then unscrew the two screws the hold the handle on. Replace the old handle with the new one and work back in the steps you took. A small tipped screw driver is a must.
My repair worked out to be a cinch! My microwave looked very funny without it's handle. I did a little research on how to replace the handle and after popping the insert out of the inside of the microwave door, I was then able to remove the two screws that held the outside panel of the door (the part with the glass) to the part with the hinges. After removing the screws, I carefully used my trusty butter knife and screw driver to pry and pop the outside panel away. This was the most time consuming part of the job. However, once it was fully off, I unscrewed the screws that held the previous handle on and fastened the new handle with the new screws provided. Popping the door all back together was super easy. However, don't forget to put the screws back in that hold the outter panel on to the part with the hinges. :-) Good luck DIY'ers!!
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
