Models > CDM2000RW459 > Instructions

CDM2000RW459 General Electric Dryer - Instructions

All Instructions for the CDM2000RW459
76 - 90 of 102
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Worn out selector knobs
Took off the broken ones and pushed on the new ones. Simple, simple
Parts Used:
Selector Knob with Clip
  • KAREN from CHEVY CHASE, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Worn out dryer knob
I just pulled the old part out using no tools with minimum pressure and pushed the new dryer knob in with no problems at all within approximately 10 seconds.
Parts Used:
Selector Knob with Clip
  • Jesse from Chesapeake, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
on/off knob cracked and would not turn on the dryer
put the new knob on and pushed it inward !! simple repair..PartSelect is a great company to do business with and very quick shipping, and great prices too. thank you so much.Brad S.
Parts Used:
Selector Knob with Clip
  • bradley from noble, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Plastics broke on inside of "Start" knob
Pushed new knob on starter shaft.
Parts Used:
Selector Knob with Clip
  • Peter from Mercerville, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Knob broke inside
Replacement knob went on without tools in 1 second.
Parts Used:
Selector Knob with Clip
  • La Rae from Buda, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
dryer door would not stay closed
inserted the latch into the opening in the front face of the dryer
Parts Used:
Door Latch
  • Dave from Redondo Beach, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Holes were not threaded on rear bearing kit
Had to tap three holes in the rear bearing to match the three attachment screws. Screw up with the part.
Parts Used:
Rear Drum Bearing Kit
  • Dennis G from Naples, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
Loud Squeek When Started until warmed-up
Ordered the recommended parts on-line and they showed up the next day. I followed the on-line repair video that described it all step-by-step.
Parts Used:
Rear Drum Bearing Kit
  • David from Oregon, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
heating element went bad
Took the dryer apart in an adjacent unused bedroom. Saw that the element was bad. Ordered new part from Part Select and installed when it arrived. The whole situation went as smooth as could be.
Parts Used:
Heating Element and Housing
  • Peter from Sidney, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
knob broke
popped the new one on, and works great.
Parts Used:
Selector Knob with Clip
  • allison from exeter, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
selector knob was striped out
Just took the old knob off and put the new knob on. It was a snap. Thanks you very much
Parts Used:
Selector Knob with Clip
  • JEAN from POPLAR GROVE, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broken door strike and latch
Parts arrived well in time, exactly what was needed. The latch was a snap-in process. The strike require gentile use of a pliers, and went in quickly. Thanks!
Parts Used:
Door Latch Door Strike
  • Jonathan from Dultuh, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
plastic selector knob on front of dryer cracked
new knob fit onto 'd' shaped spindle. This took about 30 seconds.
Parts Used:
Selector Knob with Clip
  • Rita from Cape Coral, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
dryer was not heating up
Had to remove the drum to get at the heater element also had to swop the sensers to the new element
Parts Used:
Heating Element and Housing
  • Bill from Mansfield, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Dryer Squeeky
Watched the video on YouTube and everything went great!
Parts Used:
Rear Drum Bearing Kit
  • Elbert from LAWTEY, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CDM2000RW459
76 - 90 of 102
Back to Top