This grease filter is almost fourteen inches long and almost twelve inches wide. This filter is intended for use with some downdraft cooktops and ranges.
If your stove knob is cracked or worn out, this replacement is a quick and easy fix. It’s black with chrome trim and clear heat settings, so you can adjust your burner from Off to Hi with ease. Made t...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
The surface element control switch adjusts the heat output of your stovetop burner. It has a double flat shaft and is nut-mounted for secure fitting. Ensure compatibility before ordering.
This exhaust vent blower wheel is almost seven inches in diameter, and just under four inches deep. It is made entirely of metal and is used with a range's venting system.
This pilot light lens is red and is well under an inch long.
$11.88
In Stock
Questions And Answers for C221-C
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Glenn
February 23, 2020
Thanks for the answer on wiring the 6 terminal switch. I am still unclear which terminal is the 6 th. Is it the single copper colored terminal which sits alone on one side? Thanks,
For model number C221-C
Hello Glenn,
Thank you for your question. Yes, the copper wire that sits alone will not need to be plugged in. We hope this helps.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Barry
13 days ago
Looking for replacement parts
For model number C 221-C
Hello Barry, thank you for reaching out. The replacement parts for your model are listed on our site. We have attached a link to your model's parts site. You can order the required parts from there. We hope this helps!
Why is the fan and back burner always on after we replaced the harness and ceramic cartridge?
For model number C221-C
Hello May, thank you for your question. We would recommend checking the fan switch, burner switch and wiring between the cartridge to the controls. It sounds like there is an issue with the wiring or the controls. I hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I had put up with a filter that got more and more raggedy every year, but I thought my 30 yr. old range/grill top was too old for me to find an replacement filter. What a great service you offer. I found you by web-surfing, typed in the model #, and presto--you sent me the shiny new filter. All I had to do was pop it in and throw away the nasty grill (after washing the scent off to keep the bears out of my Colorado garbage.) Thank you!
.gif "ESCUTCHEON ASSEMBLY (C221 - C) Diagram and Parts List for Jenn-Air Cooktop")
