BM4CSSACVNM Homelite Trimmer - Overview

Models starting with BM4CSSACVNM

Keep searches simple, eg. "belt" or "pump".
Hex Nut – Part Number: 678029002
Hex Nut
PartSelect #: PS12654681
Manufacturer #: 678029002
Hex nut m6.3 x 1 black oxide
$5.95
  Special Order
FUEL CAP ASSEMBLY – Part Number: 310816017
FUEL CAP ASSEMBLY
PartSelect #: PS18784260
Manufacturer #: 310816017
$10.95
  Special Order
SCREW – Part Number: 660925003
SCREW
PartSelect #: PS18788125
Manufacturer #: 660925003
(M4 x 12 mm)
$5.95
  Special Order
Stringhead Bump Knob Arborle – Part Number: 530455001
Stringhead Bump Knob Arborle
PartSelect #: PS16754852
Manufacturer #: 530455001
$5.95
  Special Order
MUFFLER ASSEMBLY – Part Number: 309320002
MUFFLER ASSEMBLY
PartSelect #: PS18784047
Manufacturer #: 309320002
$9.95
  Special Order
FRONT HANDLE ASSEMBLY – Part Number: 308991003
FRONT HANDLE ASSEMBLY
PartSelect #: PS18784025
Manufacturer #: 308991003
$10.95
  Special Order
THROTTLE CABLE GUIDE – Part Number: 526450001
THROTTLE CABLE GUIDE
PartSelect #: PS18785648
Manufacturer #: 526450001
$5.95
  Special Order
STRING GUIDE – Part Number: 529803001
STRING GUIDE
PartSelect #: PS18785849
Manufacturer #: 529803001
$5.95
  Special Order
UPPER HOUSING – Part Number: 530001004
UPPER HOUSING
PartSelect #: PS18785854
Manufacturer #: 530001004
$5.95
  Special Order
SCREW (M4 X 27MM) – Part Number: 660780002
SCREW (M4 X 27MM)
PartSelect #: PS18788092
Manufacturer #: 660780002
$5.95
  Special Order
HEX NUT (M8, LEFT HAND THREADS – Part Number: 662568002
HEX NUT (M8, LEFT HAND THREADS
PartSelect #: PS18788284
Manufacturer #: 662568002
$5.95
  Special Order
SPOOL – Part Number: 530670001
SPOOL
PartSelect #: PS18785857
Manufacturer #: 530670001
$5.95
  Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No run on start up. sputters
Remove carb cover, remove 2 t25 torx head screws. ( they are loctite in so they may be difficult). flip up carb, install new carb. swap gas fill and return lines to carb. choke and start, go to work.
Parts Used:
Carburetor Assembly
  • MIKE from LOXAHATCHEE, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke my trimmer head trying to replace the string.
I was amazed I found this EXACT trimmer head that fit PERFECTLY and for a VERY REASONABLY PRICED!!!

I’ll be back as needed!
Parts Used:
Arborless Bump-Feed Trimmer Head
  • Dwight from Saint Charles, MO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trimmer head worn out from normal use
Lay trimmer on bench so Phillips head screw on end of shaft just above trimmer head is up. Turn trimmer head until you see a gap open just below screw. Insert Allen wrench in gap. Hold in on Allen wrench with one hand while turning trimmer head to the right. Reverse threads lefty tighty ,righty loosey.
Parts Used:
Arborless Bump-Feed Trimmer Head
  • Robert from WHARTON, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!