BM4CSSAC Homelite Trimmer - Overview
Models starting with BM4CSSAC
Click on the best match to narrow your results.
- BM4CSSAC (090432502) Homelite Trimmer (Bm4cssac 30cc 4-Cycle Straight Shaft String Trimmer Mfg. No. 090432502 8-11-20 (Rev:04))
- BM4CSSAC (090432503) Homelite Trimmer (Bm4cssac 30cc 4-Cycle Straight Shaft String Trimmer Mfg. No. 090432503 8-11-20 (Rev:04))
- BM4CSSACC (090432504) Homelite Trimmer (Bm4cssacc 30cc 4-Cycle Straight Shaft String Trimmer Mfg. No. 090432504 8-11-20 (Rev:04))
- BM4CSSACC (090432505) Homelite Trimmer (Bm4cssacc 30cc 4-Cycle Straight Shaft String Trimmer Mfg. No. 090432505 8-11-20 (Rev:04))
- BM4CSSACCVNM (095432553) Homelite Trimmer (Bm4cssaccvnm String Trimmer Mfg. No. 095432553 7-6-20 (Rev:03))
- BM4CSSACVNM (095432502) Homelite Trimmer (Bm4cssacvnm 30cc 4-Cycle Straight Shaft String Trimmer Mfg. No. 095432502 8-11-20 (Rev:04))
- BM4CSSACVNM (095432553) Homelite Trimmer (Bm4cssacvnm 30cc 4-Cycle Straight Shaft String Trimmer Mfg. No. 095432553 8-11-20 (Rev:04))
- BM4CSSACVNMC (095432554) Homelite Trimmer (Bm4cssacvnmc 30cc 4-Cycle Straight Shaft String Trimmer Mfg. No. 095432554 8-11-20 (Rev:04))
Keep searches simple, eg. "belt" or "pump".
Hex Nut
PartSelect #: PS12654681
Manufacturer #: 678029002
Hex nut m6.3 x 1 black oxide
$5.95
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replaced straight shaft, and the gear head.
Removed the 2 bolts holding the gear head to shaft. On my model I had to remove the complete trimmer head, then using 2 wrench take the trimmer head adapter off the gear heD. One video showed simply putting a screwdriver in the notch behind trimmer head and unscrewing complete head. Mine of course was slightly more involved but still quite easy once I saw what needed to be done.
Parts Used:
-
Tim from HOLLISTER, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No run on start up. sputters
Remove carb cover, remove 2 t25 torx head screws. ( they are loctite in so they may be difficult). flip up carb, install new carb. swap gas fill and return lines to carb. choke and start, go to work.
Parts Used:
-
MIKE from LOXAHATCHEE, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke my trimmer head trying to replace the string.
I was amazed I found this EXACT trimmer head that fit PERFECTLY and for a VERY REASONABLY PRICED!!!
I’ll be back as needed!
I’ll be back as needed!
Parts Used:
-
Dwight from Saint Charles, MO
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!