All Installation Instructions for Amana Range AER5522VCW1

front safety glass broken

ordered new front and replaced

Parts Used:

Range Exterior Door Panel (Stainless Steel)

charles from McDonough, GA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

15 of 27 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven light would not work--faulty socket

After removing the back of the stove, the old light socket was fairly easy to remove. The new socket slipped in place and the wires reattached and now the oven has a light again. A very simple process--especially for someone who's not an expert in repairing appliances.

Parts Used:

SOCKT-LITE

Delores from Warren, MN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Baked on sauce

Used cooktop creme, oven cleaner and Mr. Clean sponges. After many days of working on the surface, we were able to remove 99% of the sauce.

Parts Used:

Cooktop Cleaner

Julie from Newnan, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours

11 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Purchased home but stove had no broiler pan.

Purchased 2 piece broiler pan from this site

Parts Used:

2 Piece Broiler Pan

Raymond from BLOOMINGTON, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

16 of 31 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broiler element failed

Slide range out,unplug range,remove rear cover to unplug element wires, open door remove screws inside oven remove element

Parts Used:

Broil Element

steven from SEDRO WOOLLEY, WA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Burner control indicator light

Shut down breaker; remove stove back cover plate (8 screws); remove the control knob; remove knob screws (2); simply remove one wire at a time and replace the coresponding wire to the new control unit; remove the snap ring on the knob bar and snap off to fit the proper length; place the control unit in position and reinstall the 2 screws; reinstall the back panel; position stove and turn throw the stove breaker on; test the burner control.

Parts Used:

Surface Burner Element Switch, Large Burner

George from Fredericksburg, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

10 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Heating element burned up

It was simple. Unscrewed to screws at the back of the oven. Slipped off the wire connectors then attached the wire connectors to the new part, put the screws back in and we were back in business.

Parts Used:

Oven Bake Element

Jerry D from Spring Valley, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

8 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven wasn't preheating to temperature

Repair of oven sensor easy to install; however, product did not resolve the problem. Returned new sensor and awaiting refund (2 weeks passed so far).

Parts Used:

Oven Sensor

Margaret from WALDORF, MD
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

8 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

DOOR HINGE BROKEN, NOT SUPPORTING DOOR

Followed youtube instructions: lifted clips on door hinges, removed door. removed screws, removed rear cover, replaced right hinge. reassembled door. caution: door handle will fall off when top two screws are removed. Alignment of screws is some what difficult, requires awl.
Replace door, return locking clips to forward position, check door for operation.

Parts Used:

Door Hinge - Active With Spring

Charles from PAYETTE, ID
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

9 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Both right and left side trims were broken.

Ordered both parts using the excellent breakdown illustrations of the door. Received the parts along with video instructions on how to repair.

Parts Used:

Side Trim

Side Trim - Right Hand Side

A D from HOUSTON, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Element wasn't being controlled by the switch it would stay on high

Ordered a new switch and replaced the old one with it.

Parts Used:

Surface Burner Element Switch, Large Burner

George from FRANKLIN, KY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

electric coils would not stay flat as drip pans were incorrect fit

replaced drip pans with correct type

Parts Used:

Chrome Drip Bowl - 8 inch

Drip Bowl - 6 Inch

Janet from Philadelphia, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The burner would not shut off.

Pulled the dial off, unscrew two screws. Pull the switch out from the back. Disconnect the wires from the old switch and connect to the new switch one by one. Set the new switch in place. Sctew the two screws in to hold the switch in place. Push on the dial.

Parts Used: