All Installation Instructions for Amana Range AER5522VCW0

oven door would not lock for self clean

switched out latch asy,rear

Parts Used:

Door Lock Motor and Switch Assembly

Don from Sherman, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

12 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bottom door trim was rusted

Removed oven door and the 3 screws holding the bottom door trim. Attached new trim piece and reinstalled oven door. Entire job took less than 5 minutes.

Parts Used:

Range Trim Lower (White)

Timothy from Terre Haute, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

11 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broke glass door on stove while cleaning it

I'm still unsure why it broke ,but it was just a matter of removing two screws that hold the handle in place and sliding in the glass...

Parts Used:

Range Exterior Door Glass

Aires from Canton, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

16 of 29 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven light would not work--faulty socket

After removing the back of the stove, the old light socket was fairly easy to remove. The new socket slipped in place and the wires reattached and now the oven has a light again. A very simple process--especially for someone who's not an expert in repairing appliances.

Parts Used:

SOCKT-LITE

Delores from Warren, MN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Baked on sauce

Used cooktop creme, oven cleaner and Mr. Clean sponges. After many days of working on the surface, we were able to remove 99% of the sauce.

Parts Used:

Cooktop Cleaner

Julie from Newnan, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours

11 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Purchased home but stove had no broiler pan.

Purchased 2 piece broiler pan from this site

Parts Used:

2 Piece Broiler Pan

Raymond from BLOOMINGTON, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

16 of 31 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broiler element failed

Slide range out,unplug range,remove rear cover to unplug element wires, open door remove screws inside oven remove element

Parts Used:

Broil Element

steven from SEDRO WOOLLEY, WA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Burner control indicator light

Shut down breaker; remove stove back cover plate (8 screws); remove the control knob; remove knob screws (2); simply remove one wire at a time and replace the coresponding wire to the new control unit; remove the snap ring on the knob bar and snap off to fit the proper length; place the control unit in position and reinstall the 2 screws; reinstall the back panel; position stove and turn throw the stove breaker on; test the burner control.

Parts Used:

Surface Burner Element Switch, Large Burner

George from Fredericksburg, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

10 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Heating element burned up

It was simple. Unscrewed to screws at the back of the oven. Slipped off the wire connectors then attached the wire connectors to the new part, put the screws back in and we were back in business.

Parts Used:

Oven Bake Element

Jerry D from Spring Valley, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

8 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven wasn't preheating to temperature

Repair of oven sensor easy to install; however, product did not resolve the problem. Returned new sensor and awaiting refund (2 weeks passed so far).

Parts Used:

Oven Sensor

Margaret from WALDORF, MD
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

8 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Outer glass of the oven door is broken.

I took out the two screws that held the oven handle in place inserted the glass in the door and replaced the two screw!!! That easy!

Parts Used:

Range Exterior Door Glass

Ernestine from baltimore, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

11 of 20 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Both right and left side trims were broken.

Ordered both parts using the excellent breakdown illustrations of the door. Received the parts along with video instructions on how to repair.

Parts Used:

Side Trim

Side Trim - Right Hand Side

A D from HOUSTON, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Stove burner wouldn't heat

First I disconnected the power, removed the screw that hold the element in place. Then, I pulled the element out and cut the two wires. I connected the two wires with the new element as the instruction provided by Part Select. I put the element back and screwed it in place. I plugged in the power and turned on the burner. It works. It is really easy to repair.

Parts Used: