AE9433 Whirlpool Dryer - Overview

Sections of the AE9433

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Multi Rib Belt – Part Number: WP40111201
Multi Rib Belt
★★★★★
★★★★★
(40)
PartSelect #: PS11742271
Manufacturer #: WP40111201
This dryer drum belt from Amana has five ridges and is 93-3/8" inches in length, and 3/8 of an inch wide. It is flat, black in color, and is made entirely of rubber.
$18.61
  In Stock
Idler Pulley Wheel w/ Bearing – Part Number: WPY54414
Idler Pulley Wheel w/ Bearing
★★★★★
★★★★★
(4)
PartSelect #: PS11757553
Manufacturer #: WPY54414
This two inch wide idler pulley wheel is beige in color and is made of plastic. This pulley wheel comes with its own metallic bearing in its center.
$28.25
  In Stock
Thrust – Part Number: WPW10121334
Thrust
★★★★★
★★★★★
(1)
PartSelect #: PS11748620
Manufacturer #: WPW10121334
$10.09
  In Stock
Retaining Ring – Part Number: WP23748
Retaining Ring
PartSelect #: PS11740487
Manufacturer #: WP23748
This metal retaining ring is well under an inch long. Use it for your Maytag brand clothes washer or your clothes dryer.
$18.02
  In Stock
Limit Thermostat – Part Number: WPW10116735
Limit Thermostat
PartSelect #: PS11748479
Manufacturer #: WPW10116735
This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 225 degrees...
$84.65
  Special Order
Light Bulb - 7W – Part Number: W10857122
Light Bulb - 7W
★★★★★
★★★★★
(1)
PartSelect #: PS11731356
Manufacturer #: W10857122
Sold individually. This bulb is a 7 watt appliance incandescent light bulb.This appliance light bulb is two inches long. It is used for many clothes dryers.
$21.95
  In Stock
Heating Element Kit - Red Dot – Part Number: 61927
Heating Element Kit - Red Dot
PartSelect #: PS2061575
Manufacturer #: 61927
This 240 volt heating element is used for electric clothes dryers. Included with this element is a fuse kit consisting of a thermal fuse, a high limit thermostat, two wire leads, and four mounting screws.
$147.03
  In Stock
Blower Wheel – Part Number: 56000
Blower Wheel
★★★★★
★★★★★
(3)
PartSelect #: PS2052494
Manufacturer #: 56000
Part may differ in appearance, but functions same as original part.
$87.57
  In Stock
Range Hex Nut – Part Number: WP488130
Range Hex Nut
PartSelect #: PS11742711
Manufacturer #: WP488130
Part may differ in appearance, but functions same as original.
$12.11
  Special Order
Dryer Clampmotor – Part Number: WP660658
Dryer Clampmotor
PartSelect #: PS11743369
Manufacturer #: WP660658
This clamp is used to secure the drive motor.
$14.76
  In Stock
Idler Pulley Shaft – Part Number: WP56461
Idler Pulley Shaft
PartSelect #: PS11742857
Manufacturer #: WP56461
This shaft is made to fit the center of the idler pulley wheel of many clothes dryers. It is less than two inches long, and is made of metal.
$100.24
  Special Order
Washer Screw Ground – Part Number: WP3351614
Washer Screw Ground
PartSelect #: PS11741183
Manufacturer #: WP3351614
$10.09
  In Stock

Questions And Answers for AE9433

Be the first to ask our experts a question about this model!

Common Symptoms of the AE9433

[Viewing 7 of 7]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing Fixing
Show All
Too hot
Fixed by
these parts
Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing Fixing
Show All
Not Heating
Fixed by
these parts
Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace drive belt
Remove front panel, lint basket, motor mounts,exhaust hood, front drum brackets. Then slip serpentine belt around drum, pressure w/ tension idler pulley and slip around drive motor spindle. Replace all parts in reverse order (a two person job).
Vacuumed inside of dryer (full of lint.)
Parts Used:
Multi Rib Belt
  • Robert from Skokie, IL
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver
306 of 356 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blower fan cracked
Unplug the power cord from the unit. Remove the lower front panel; then the upper front panel including the door (unplug wire to door switch). Then remove the cover on the fan housing. Need to block the motor from turning; I used a stick to jamb the front of the motor; then unscrew the old blower fan and screw on the new one. Then replace the cover and put front panels back on.
Parts Used:
Blower Wheel
  • Rick from Birch Run, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set
44 of 54 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element went bad
I couldn't find any information on the internet on how to fix my dryer, so I took every screw out of it, which I later found was not needed - just 2 in the front. Then I had to figure out WHERE the element was. Turns out, against the back panel with 2 screws. I had to crawl on my belly to get in there with little room to work. Installing the new one didn't take long at all though. I also vacuumed out the inside and cleaned it well, then put all the screws back in it.

I'm glad I re-did all the screws because now it sounds brand new. It's 3 times quieter than it ever was (it was donated to me), and it feels great that I was able to fix it on my own for about $50.
Parts Used:
Heating Element Kit - Red Dot
  • Jeff from Conyers, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
29 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!