AB1924PEKS6 Amana Refrigerator - Instructions

Pull out the drawers and removed the old rail, place new rail in and return drawers. Like New and took about 3 minutes.

removed the glass covering the rail, removed the rail and replaced with new rail

Took out drawers and glass shelf, installed new part. Perfect fit. Easy as pie.

I placed the back of the bracket into the slot in the rear of the refrigerator and stretched the front plastic rim on the glass shelf over the front of the new center rail until it snapped into place (all the while hoping I didn't cause further damage to my refridgerator!) and wa-la, piece of cake! My impatience paid off this time!

Removed drawers, lifted glass shelf, installed new part

The entire process took lees than 5 minutes. I simply removed the broken rail, and inserted the new one. Voila! Like new!

The rail had broken off, so there was nothing to remove, except the crisper drawers. I had called an amana repair service and the repairman told the part was about $9 and the cost to install was $127. When I almost fainted, he told me I could probably do it myself. Wow, was he right! I ordered the part, it came in about 2 days, I looked at the rail, removed the glass shelf, hooked the rail into the little opening at the back, and bang! All done. It took me 10 seconds!!

I watched your video. The part came faster than expected. The video was very helpful. I am very happy with the service.

Easy as pie: removed the baskets; lifted the shelf; placed new rail; replaced shelf & baskets.

Disconnected electrical plug between ice maker and frig. Removed 3 screws holding ice maker in place and removed ice maker. Ice tray shelf only uses the upper 2 screw locations. It would have been helpful if I had been told that the original screws holding the ice maker would not work because they are too short, and that I would need some special washers/spacers that fit the new shelf. Luckily I had longer screws available and I was able to fabricate the washers from some scrap plastic. Installed successfully.

replaced electric control board, defrost for six hours. next day (24 hours) same problem, dusterhoff2928@charter.net

Took out both crispers. Removed glass shelf on top of crisper support. Removed small broken piece of rail still held in place. Inserted new crisper rail and put crispers back in place.

Although there where no instructions, reading the comments by others made this a really easy replacement.

Finding the part that I needed was incredibly easy. I usually leave all repairs to my husband but I was getting frustrated that my vegetables were freezing due to the drawer laying right on the wall dividing the freezer area. I took it upon myself to search for parts by using the refrigerator model number, This site is the BEST!! By providing pictures of the parts and where they go I was able to order the correct one. It arrived within a few days and I installed it in less than 5 minutes. I was relieved that I had ordered the correct part and my husband was pleasantly surprised that I took care of it myself. Thanks

I had to remove the 2 drawers, naturally, but then found I also had to remove the glass shelf and bracket that holds them, because the end of the center rail had broken off and stuck in the recess of the shelf. No problem. Washed the shelf and the end piece fell out, eliminating the need for pliers or tweezers. Put the new center rail in place, replaced the shelf, replaced the 2 crisper drawers and, "voila" - good as new (until next time some big, strong guy slams the crisper drawer). Thanks for quick delivery; I don't often get in the mood to fix things, so when I do it's nice the part arrives before my fixing-muse flies away.