A3H363GA0 (AMBAHCI) LG Air Conditioner - Overview
Sections of the A3H363GA0
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
BEARING
PartSelect #: PS12075835
Manufacturer #: 4280A20004M
Unusual noise from an indoor blower can be caused by a worn blower wheel bearing. This replacement bearing provides a smooth support point that allows the wheel to rotate while moving air across the r...
$25.95
In Stock
Fan Assembly,Propeller
PartSelect #: PS3528630
Manufacturer #: 5901A10033A
This propeller fan assembly circulates air efficiently to support cooling, ventilation, or heat distribution. Balanced airflow helps protect internal components from overheating and improves performan...
$69.25
In Stock
Common Symptoms of the A3H363GA0
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Plastic fan broke when I attempted to clean it
The inside air blower for the LG mini-split collects lint and clogs up. Removing the broken blade requires removing the outer plastic housings, then screws at each end of the blower housing. Some screws at the control end require removing the control units first. There is a set screw that connects the fan to the motor shaft at the control end. There is a missing blade in the fan to allow access. This screw was lock-tighted in place and required significant force to loosen. The new fan took some wiggling to get it onto the shaft. Then replace the screws at each end of the fan housing, followed by the control unit screws, and the plastic outer covers. It was not an easy job. I used more care with a small bottle brush to clean the second fan unit and avoided breaking that fan.
Parts Used:
-
Donna from Austin, TX
-
Difficulty Level:Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!