81622 LG Microwave - Overview
Sections of the 81622
[Viewing 1 of 1]
Exact Part matches for your search term
[Viewing 1 of 1]
CORNER POST, 3X3 X .400X
This part number matches the current model number 81622
PartSelect #: PS4270463
Manufacturer #: 81622
$22.56
Special Order
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 120V 30W
PartSelect #: PS3530415
Manufacturer #: 6912W1Z004B
$24.95
In Stock
Order within the next 5 hrs and your part ships today!
Microwave Grease Filter
PartSelect #: PS3527528
Manufacturer #: 5230W1A012B
Sold individually.
$21.95
Special Order
Air Duct Bracket
PartSelect #: PS3523851
Manufacturer #: 4810W1A151A
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be...
$24.15
In Stock
Order within the next 5 hrs and your part ships today!
Mounting Plate
PartSelect #: PS3518617
Manufacturer #: 3300W0A030A
$56.05
In Stock
Order within the next 5 hrs and your part ships today!
Capacitor
PartSelect #: PS3517241
Manufacturer #: 0CZZW1H004B
$60.45
In Stock
Order within the next 5 hrs and your part ships today!
Microwave Door Handle
PartSelect #: PS3563592
Manufacturer #: 3650W1A075E
This manufacturer-approved door handle is for microwaves.
No Longer Available
Common Symptoms of the 81622
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
One of the switches in a component that door activates when shut.
I replaced the whole component with all three switches in it even though only one switch was bad . Taking out one switch out of the holder unit would probably have damaged the unit that was holding the switches. Easy install and it works great again .
Parts Used:
-
Jimmy from OZARK, MO
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not start.
diagnosed defective 'door-shut switch' in the switch holder assembly. rather than replace switch, replaced entire locker holder assembly which made for a very simple and easy repair...not to mention very inexpensive.
Parts Used:
-
James from VIRGINIA BCH, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
8 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave not heating, everything else works
Not knowing which of the switches to replace I ordered all three in the assembly. Replacing the full assembly was easy, first unplug the microwave. Then remove the top cover to access the screws that hold the control panel in place and let the control panel hang. There are two screws that hold the assembly in place - remove those. I used needle nose pliers to pull the wires off of the switches and immediately put the wires on to the new assembly so there was no confusion on what wire went where. Place the assembly back in position, replace the two screws to hold it in, put control panel in place and secure screws. Replace top cover and plug in.
Parts Used:
-
Barbara from Philadelphia, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!