The drum support roller for your dryer holds the drum in place while the drum turns on the support wheels. The drum roller is round with a bearing in the middle and measures approximately 3 inches in ...
$182.93
In Stock
Order within the next 1 hr and 15 mins and your part ships today!
This part has the felt strip and is used to collect lint as it passes through the dryer vent. The lint filter in your dryer is used to collect lint as it passes through the dryer vent. If you notice t...
$84.67
In Stock
Order within the next 1 hr and 15 mins and your part ships today!
The moisture sensor, also known as a humidity sensor, works in conjunction with your dryer by helping determine the amount of moisture in the drum to reduce overdrying. If the timer doesn’t advance co...
$28.25
In Stock
Order within the next 1 hr and 15 mins and your part ships today!
Looking to extend the lifespan of your LG electric dryer? Our authentic LG Idle Pulley could be the missing piece you need! This little thing plays a big role in keeping your dryer working smoothly an...
$42.99
In Stock
Order within the next 1 hr and 15 mins and your part ships today!
This plastic adjustable dryer leg is used to support the weight and adjust the height of your dryer to keep it level. To install the leg, tip the dryer back and screw it into the bottom of your dryer ...
$13.88
In Stock
Order within the next 1 hr and 15 mins and your part ships today!
Take a look at this essential LG Dryer Safety Switch Assembly. A don't-miss fixture for your LG Dryer. This is more than just a part, it's a safeguard for you. If your dryer's door springs open, this ...
$56.87
In Stock
Order within the next 1 hr and 15 mins and your part ships today!
Questions And Answers for 79680441900
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dave
August 19, 2021
How do i get the front panal off?
For model number 79680441900
Hello Dave, thank you for you question. First unplug the dryer, then take the top panel off by removing the screws at the top of the dryer in the back, next depress the tabs on the control panel from the inside and pull it off, disconnect the wire harness, remove the screws to release the circuit board bracket, remove the control bracket screws, and pull the bracket off, now remove the screws located at the bottom of the dryer, pull the lower panel out and then down to detach, reach into the lower cabinet to disconnect the door switch and moisture sensor wire harnesses, remove the screws at the bottom and at the top of the front panel, remove the mounting screws located inside the door, and pull the panel off. We hope this helps!
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Megan
February 6, 2025
What would cause my dryer to squeal and then something big get sucked through dryer hose but afterwards my dryer started making a spazing loud automatic ar type vibrating sound.
For model number 79680441900
Hi Megan,
Thank you for your question. If the lint filter becomes dislodged when the dryer is in use, an article of clothing can be sucked into the lint duct assembly. This may have caused the squealing noise you heard, but this noise can also be caused by a worn or damaged idler pulley or rollers. The spazing noise you heard afterwards may have been from a part that was damaged when the clothing went through the lint duct assembly. You will need to dismantle the dryer to access the lint filter duct and the interior of the dryer to see where these noises are coming from and to see what parts may have been damaged. We have included a link to one of our YouTube videos that you may reference for information on how to access the dryer lint duct and the interior. The dryer in the video may not be the same as yours, but it will give you a general idea on how to access the parts. We hope this helps!
Had to replace front drum support rollers. Removed screws underneath top in back that held bracket that keeps top in place. Slid top towards rear and lifted up. Removed 4 screws that hold plastic front panel in place (inside..2 on each corner) Unplugged front panel electric plugs to remove panel. Opened door..removed 2 screws at bottom of door opening. Removed screws on top of front panel. Unplugged door switch plug. Removed front panel. Removed right front roller with 9/16th wrench for nut. Adjustable for back of stud. Lifted up on drum to get roller out. Reversed to install. Left roller a bit harder to get to stud. Removed and installed same as right side. Did not attempt to replace rear rollers. Have them if needed but very much more involved to replace.
I actually went to mr fix it on u tube. Great instruction on how to take dryer apart. First I unplugged the dryer. I found I could reach the heating system by removing the lint tube in the back of the dryer. I put my I phone with the light on inside the back of the dryer and tested the connections to see if all were working. The thermal fuse was not working. I removed the two wires , red on top and white on the bottom. Then used a small Phillips screwdriver to remove the two mounting screws and removed the fuse. I then used a vacuum to clear any lint from the back of the dryer and inside the dryer. This took me about an hour and a half. I did it this way because I did not want to disassemble the entire dryer to get to the components. I received the fuse in 3 days and tested it. It was fine. I then put it in the dryer screwed it in place, connected the wires. Replaced the lint tube. This took about 10 minutes. Dryer is running great.
I followed video instruction in disassembling and set screws from each section into diferent small bowls in the order they were removed. Hardest part was some of the screws were really hard to get loose without stripping them and my control panel did not match video but I figured it out. Replacing the parts were easy and putting it back together. While it was apart I cleaned everything including fan blower wheel. Thanks for the right parts and your online video. With your help and a prayer this 62 year old woman fixed the problem and dryer runs like new.
