79551733812 Kenmore Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Water valve stopped working after a power surge
Unplugged the power cord. Shut off water supply to the refrigerator. Removed the water supply and distribution lines one at a time and reinstalled the new lines as I went along.
Turned water supply back on and plugged the power cord back into the wall outlet. Tested the operation and viola…it works great now!
A great big thank you for your professional and well established service.
Turned water supply back on and plugged the power cord back into the wall outlet. Tested the operation and viola…it works great now!
A great big thank you for your professional and well established service.
Parts Used:
-
Dan from PITTSFIELD, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice chute would not open.
Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.
Parts Used:
-
Steve from MUKWONAGO, WI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
18 of 52 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I needed a new gasket
I didn't because the part was never delivered.
The box was apparently damaged according to the tracking.
Your company didn't bother to communicate that they couldn't send another one without a new order.
They also didn't give a refund until I contacted them because they are just too busy.
Your company was a huge waste of time.
Publish that. Go ahead.
The box was apparently damaged according to the tracking.
Your company didn't bother to communicate that they couldn't send another one without a new order.
They also didn't give a refund until I contacted them because they are just too busy.
Your company was a huge waste of time.
Publish that. Go ahead.
Parts Used:
-
HEIDI from HINCKLEY, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
3 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water/ice maker not working
Remove push plate for water/ice maker switch, remove 2 screws and 2 wires for switch. Replace with new.
Parts Used:
-
Brent from ROGERS, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
8 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!