The 6” radiant cooking element with limiter fits under the glass cooktop and supplies heat to the cooking area. If your element is not heating, you can test the element for continuity with a multimete...
This radiant burner element delivers powerful, even heat for your cooktop, ensuring fast and efficient cooking. Measuring 9 inches and rated at 3200 watts, it is ideal for replacing a worn or malfunct...
If one of your cooktop burners isn’t heating properly or is stuck on a single temperature, replacing the infinite switch may solve the issue. This dual-element switch controls the burner’s heat levels...
If your cooktop isn’t heating like it used to, this triple radiant surface element might be the fix. It sits under the glass surface and heats your pots and pans with three different zones—small, medi...
This switch controls the activation of specific appliance functions by opening or closing an electrical circuit. Designed for precise performance, it is replaced when functions fail to respond or operate intermittently.
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Larry
July 9, 2023
left front dual element not working. The last time it was used the light stayed on saying the element was hot but it was cold.
For model number 79044123110
Hi Larry, thank you for the question. Inspecting the left front element control switch, part number PS2333324, will help you fix your problem. Good luck with your repair!
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
