79044113511 Kenmore Cooktop - Overview
Sections of the 79044113511
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Surface Burner Switch - 8 Inch
PartSelect #: PS2342881
Manufacturer #: 318293825
This switch controls the large surface burner. As per manufacture the original screws will damage new switch. New screws are needed.
$107.95
In Stock
Order within the next 6 hrs and your part ships today!
HEATING ELEMENT,MIDDLE,TURBO
PartSelect #: PS18375114
Manufacturer #: 8583165300010
This radiant burner element delivers powerful, even heat for your cooktop, ensuring fast and efficient cooking. Measuring 9 inches and rated at 3200 watts, it is ideal for replacing a worn or malfunct...
No Longer Available
Infinite Switch Kit
PartSelect #: PS444539
Manufacturer #: 318191000
If one of your cooktop burners isn’t heating properly or is stuck on a single temperature, replacing the infinite switch may solve the issue. This dual-element switch controls the burner’s heat levels...
$111.64
In Stock
Order within the next 6 hrs and your part ships today!
Dual Burner Element Assembly - 1800/2600W
PartSelect #: PS978790
Manufacturer #: 318258201
If your cooktop isn’t heating properly, this dual radiant element could be the fix you need. It delivers reliable heat to your cooking surface using a radiant coil beneath the glass, making it perfect...
$638.67
In Stock
Order within the next 6 hrs and your part ships today!
SWITCH
PartSelect #: PS2333324
Manufacturer #: 318531500
This switch controls the activation of specific appliance functions by opening or closing an electrical circuit. Designed for precise performance, it is replaced when functions fail to respond or operate intermittently.
$151.53
Special Order
KNOB
PartSelect #: PS3419267
Manufacturer #: 316353556
$121.53
In Stock
Order within the next 6 hrs and your part ships today!
Common Symptoms of the 79044113511
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
switch was not turning off had to jiggle it to go off
no problem slightly different shape than original but labels for wires matched up mounting screws aligned perfectly works great
Parts Used:
-
Leon from Deer Paerk, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
19 of 35 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large Burner was not heating up properly
Don't be put off when you first get the new switch. It's not an exact duplicate to the one your replacing. You will notice that the new switch has 5 electrical connectors and you'll see 6 wires on the old one. start by removing the L1 wire(s) off the old switch, you will see that it actually has 2 wires connected to the same connector. Now connect to the L1 position on the new switch. Continuie with taking one wire at a time off the old switch and connect to the corresponding connector on the new switch (all the connectors are coded the same, ex. L1, P, etc....) Once complete the switch and burner worked perfectly
Parts Used:
-
Michael from Oconomowoc, WI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
9 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner got to hot
-
larry from chatsworth, GA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench set
12 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!